Summary of Contents for PHD PHD 2260X
- Page 1 Owner's Manual & Installation Guide Audiophile Sound Systems Audiophile Sound Systems -15-...
-
Page 2: Specification
SPECIFICATION TROUBLE SHOOTING GUIDE. and solutions. Before you consult this listing, make sure the vehicle's electrical system is AMPLIFIER PHD 2260X PHD 4075X PHD 4110X PHD 11110X working properly by verifying that other electrical items (e. g. headlights, windows, etc.) Still function correctly. -
Page 3: Front Panel
FRONT PANEL Congratulations on your Purchase PHD 2260X -ment and one year of trouble free service. Please take a few moments to read this manual thoroughly. It will explain the features and operation of your unit and help insure trouble free installation. -
Page 4: Speaker Connections
SPEAKER CONNECTIONS CAUTION 0.5 meters from the battery. This fuse is to protect the car not the electronics. In case of a short, the fuse will blow instead of the wire burning up. Using other than the recommended void your warranty. Do not run wiring underneath or outside the car since exposure to the elements may cause ADJUSTMENTS the insulation to deteriorate rapidly, resulting in short-circuits and/or intermittent operation. -
Page 5: Installation Diagram
SPEAKER CONNECTIONS INSTALLATION 1 CHANNEL SPEAKER WIRING DIAGRAM (PHD 11110X) MOUNTING: 1. After reading precaution, decide where you are going to install the unit. Also, see Fig.1. Don't be fooled by the outputs. Two outputs are used strictly for convenience and are Only one output terminal. -
Page 6: Input Connections
CONNECTIONS SPEAKER CONNECTIONS INPUT CONNECTIONS 4 CHANNELSPEAKER WIRING DIAGRAM (PHD 4075X,PHD 4110X) 2 SPEAKER BRIDGED if the head unit is equipped with the low level outputs. If not, you can use a "high to low converter" available through your local car audio shop. - Page 7 SPEAKER CONNECTIONS 2CHANNEL SYSTEM WIRING DIAGRAM (PHD 2260X) This single channel (bridged/mono) operation is 4 or 8 ohms. Trichannel power is referred to stereo and mono at the same time. Minimum impedance remains the same for three channel (front /subwoofer) systems as long as proper passive crossovers are used. Connect right have the positive wire from the speaker connected to the positive speaker terminal of the moving out of phase which causes bass cancellation.
- Page 8 4CHANNEL SYSTEM WIRING DIAGRAM (PHD 4075X,PHD 4110X) 1CHANNEL SYSTEM WIRING DIAGRAM (PHD 11110X) GNDREM GNDREM CAR STEREO HEAD UNIT CAR STEREO HEAD UNIT FIG.2 FIG.2...