CO-OPM-96 / Interactive Operating Manual Best viewed with Adobe Acrobat Reader 1. Introduction 2.3 Menu 1.1 Special Features 2.3.1 Scan Set 2.3.2 Offset 1.2 Specifications 1.3 Accessories 2.3.3 Auto Power Off 2.3.4 Time Set 1.4 Charge Method 1.5 Meter Care 2.3.5 Data Delete...
Contents CO-OPM-96 1. Introduction 1.1 Special Features - Automatic Wavelength specific Power measurement - Compact and lightweight for field use - Easy one hand operation - Data Storage capabilities - Auto shut off - Fast power up and Test - High-quality graphics 1.2 Specifications...
1 ea USB Drive (User’s Manual) 1 ea 1.4 Charge Method The CO-OPM-96 has a rechargeable battery. A USB power adapter and micro USB cable are provided for charging. Typical charge time is six hours. Charging conditions: LED Color Action of LED...
Contents CO-OPM-96 2. Getting Started 2.1 Explanation of Operating Keys Function Backlight Power and backlight On/Off Menu Access system Menu and settings Mode Options : ‘Auto’ and ‘Manual’ dB/dBm Toggle between dB and dBm UOM SCAN All wavelengths are scanned and power levels are displayed Graph Power levels of selected channels displayed as a graph.
Contents CO-OPM-96 2.2 Key Function 2.2.1 Power ON / OFF To turn on and off. Press the button more than 2 seconds, the logo shown below Backlight appears and it moves to ‘Power Meter’ page. Press the button more than 2 seconds to turn the power off.
Contents CO-OPM-96 2.2.2 Mode Power Measurement has 2 options ‘Auto’ and ‘Manual’ . If you select ‘Auto’ , the instrument automatically scans the optical input and displays the wavelength which has been detected with the highest level of power.
Contents CO-OPM-96 2.2.3 dB / dBm button toggles between dB and dBm UOM. dB/dBm 2.2.4 Scan Press the button, to measure all selected wavelengths and display in table format. You can select the page using ◄ ► ▲ ▼.
Contents CO-OPM-96 2.2.5 Graph Press the button after scanning, to display power measurements in graph Graph format. 2.2.6 Save Press the Save button, the measurement will be saved using the current date and time as the file name. Or, a 17 character filename can be entered using the keypad.
Contents CO-OPM-96 2.2.7 Recall Press the button, to view files saved on device. Recall Use ▲, ▼ to highlight desired file. Press the button to select the file to be displayed. ChallengerOptics.com Wavelength Specific Optical Testing and Measurement Equipment...
Contents CO-OPM-96 p 10 2.3 MENU button, allows you to configure the operating Menu environment of ‘CO-OPM-CW12’ . The menu consists of: Scan Set Offset Auto Power Off Time Set Data Delete Data Format System Info Scan Display...
Contents CO-OPM-96 p 11 2.3.1 Scan Set When you choose the Scan Set, ‘Odd Channels’ , ‘Even Channels, ‘All Scan’ and ‘Selected’ are displayed. ODD Channels measures all the HALF channels - 17.5, 18.5, 19.5, etc. EVEN Channels measures all the WHOLE channels - 17.0, 18.0, 19.0, etc. ‘All Scan’...
Contents CO-OPM-96 p 12 2.3.2 Offset When measuring form a test port the ‘Offset’ can be added to the signal power. When you choose the ‘Offset’ , you can choose either, ‘All Channel’ and ‘Each Channel’ . Press the button after selecting ‘All Channel’...
Contents CO-OPM-96 p 13 2.3.3 Auto Power Off The power automatically goes off if the user does not input any key in the determined time. Press the button after selecting ‘Auto Power OFF’ , you can set the Auto power off time in minutes.
Contents CO-OPM-96 p 14 2.3.5 Data Delete Press the button after selecting ‘Delete Data’ , you can delete measurement files. Press the key after choosing the file you want to delete, the message appears on the screen to confirm to delete or not.
Contents CO-OPM-96 p 15 2.3.6 Data Format You can delete all saved files by formatting the memory. Press the button after ‘Data Format’ , message appears on the screen to confirm. Press the button, all files are deleted from the memory.
Contents CO-OPM-96 p 16 2.3.8 Scan Display ‘Scan Display’ consists of ‘All’ and ‘Measured’ . This can be selected using ◄ ► ▼ ▲. ‘All ’will display power levels of All wavelengths measured by the meter REGARDLESS of power level.
Contents CO-OPM-96 p 17 2.3.9 PM Mode The ‘PM Mode’ consists of the ‘Auto’ and ‘Manual’ . This can be selected using the ◄ ► ▼ ▲ buttons. If you choose the ‘Auto’ , The meter will automatically detect and display the channel with the highest power.
Contents CO-OPM-96 p 18 2.3.10 Scan Mode The ‘SCAN Mode’ consists of the ‘Repeat’ and ‘Single’ . This can be selected using ◄ ► ▼ ▲. If you select ‘Repeat’ , the instrument repeatedly scans the optical input measurements are displayed in real time.
Contents CO-OPM-96 p 19 2.3.11 Threshold Threshold allows you to change the baseline, or lowest power level, of the meter. Enter the desired value. Use the ‘+/-‘ key as needed. –30.00 dBm is the default setting. Press the button after inputting the new threshold to SAVE the value.
Contents CO-OPM-96 p 20 2.3.12 Display Unit You can change the unit on the display. The ‘Display unit’ consists of the ‘Wavelength’ (nm) and ‘Frequency’ (THz). This can be selected using ◄ ► ▼ ▲. If you choose the ‘Frequency’ , shows the below screen.
Contents CO-OPM-96 p 21 2.3.13 Graph Unit Options for GRAPH UNIT are ‘Standard” and ‘ITU Grid’ If ‘STANDARD’ is chosen, Graph units will be displayed in Wavelength (nm). If ‘ITU Grid’ is chosen, Graph units will be displayed in DWDM ITU Channels (17 –...
Contents CO-OPM-96 p 22 2.4 Battery Replacement - remove rubber boot - remove back plate w/ PH#1 Phillip screw driver - remove and retain pink battery pad for re-installation on new battery - swap old battery with: battery p/n: CO-BATT-4800...