Table of Contents
Advertisement
Chapter 3: Using the TV's Menu System
Channel
1 Signal Type:
CABLE TV
2 Auto Channel Search
3 List
0 Exit
Time
1 Sleep Timer
2 Set Time
3 Wake-up Timer
0 Exit
20
Channel Menu
Signal Type Displays a toggle that lets you select the current antenna type.
Antenna Choose this if you are currently using an off-air antenna for UHF/VHF TV
signals.
Cable TV Choose this if you are currently using cable or a cable box for TV signals.
Auto Channel Search Tells the TV to search automatically for all the channels available
through the antenna input. When the TV finds an active channel, it places it in the channel
scan list; inactive channels (weak stations or channels with no signal at all) will be removed
from the channel list.
List Displays a control panel that lets you edit your channel scan list. Use the arrow buttons
to move between fields and to enter settings.
Chan # Use the up and down arrow buttons to scroll up and down through the
channels available via your antenna. You can enter the channel number directly using the
number buttons.
Scan List Use the up and down arrow buttons to indicate whether the channel number
indicated is included (Yes) or is not included (No) in the channel scan list.
Time Menu
Sleep Timer Displays a control panel that lets you select the amount of time you want to
give the TV before it shuts itself off. Use the VOL up and down buttons to increase or decrease
the timer by 30-minute increments (up to 2 hours).
Set Time Displays a control panel that lets you enter the current time. Use the VOL up and
down buttons to set the time.
Wake-up Timer Displays a control panel that lets you set up a schedule for turning the TV
on automatically. Use the VOL up and down buttons to set the Wake-up Timer.
Graphics contained within this publication are for representation only. Your unit might differ slightly.
Advertisement
Table of Contents
