Table of Contents
Advertisement
GUILD
1050W 125mm Angle Grinder
Instruction Manual
Important
- Please read these instructions fully before operating or maintaining your Guild angle grinder
These instructions contain important information that will help you get the best from your Guild
angle grinder, ensuring it remains safe to operate.
If you need help or have damaged or missing parts, call the Customer Helpline on 0333 3201989
After Sales Support
UK/Ireland 0333 3201989
Help@guildpowertools.co.uk
PGA125G
Advertisement
Table of Contents
Related Manuals for Guild PGA125G
Summary of Contents for Guild PGA125G
- Page 1 Important - Please read these instructions fully before operating or maintaining your Guild angle grinder These instructions contain important information that will help you get the best from your Guild angle grinder, ensuring it remains safe to operate. If you need help or have damaged or missing parts, call the Customer Helpline on 0333 3201989...
-
Page 2: Table Of Contents
Contents Safety Information.....................3 In The Box........................9 Accessories........................9 Operating Instructions.....................10 Working Hints For Your Angle Grinder..............13 Maintenance......................13 Trouble Shooting......................14 Technical Data......................14 Environmental Protection..................15 Guarantee........................16 Declaration of Conformity..................16 Plug Replacement (Uk & Ireland Only)..............17 Customer Helpline 0333 3201989... -
Page 3: Safety Information
Safety Information Important - Please read these instructions fully before starting assembly Warning Symbols The following warning symbols appear throughout this assembly manual and indicate the appropriate safety measures you should take when assembling and operating the angle grinder. To reduce the risk of injury, Please read the instruction manual Warning Wear ear protection Wear eye protection... - Page 4 Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
- Page 5 Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach.
- Page 6 Safety Information Important - Please read these instructions fully before starting assembly Safety Instructions For All Operations Safety Warnings Common For Grinding Or Abrasive Cutting-Off Operations a) This power tool is intended to function as a grinder or cut-off tool. Read all safety warnings, instructions, illustrations and specifications provided with this power tool.
- Page 7 Safety Information Important - Please read these instructions fully before starting assembly Safety Instructions For All Operations m) Do not run the power tool while carrying it at your side. Accidental contact with the spinning accessory could snag your clothing, pulling the accessory into your body. n) Regularly clean the power tool’s air vents.
- Page 8 Safety Information Important - Please read these instructions fully before starting assembly Additional safety instructions for grinding and cutting-off operations Safety Warnings Specific for Grinding and Abrasive Cutting-Off Operations a) Use only wheel types that are recommended for your power tool and the specific guard designed for the selected wheel.
-
Page 9: In The Box
In The Box Parts Auxiliary handle Grinding wheel (not supplied) Spindle locking button Spanner Hand grip area Outer flange Safety lock-off switch Inner flange Cap of Carbon Brush Guard Clamping Lever (SEE FIG A) Wheel guard for grinding Clamp Adjustment Nut (SEE FIG A) Accessories Auxiliary handle Wheel guard for grinding... -
Page 10: Operating Instructions
Operating Instructions NOTE: Before using the tool, read the instruction book carefully. Intended Use This tool is intended for cutting, roughing and brushing metal and stone materials without using water. For cutting metal, a special protection guard for cutting (accessory) must be used. - Page 11 Operating Instructions 3. FITTING THE DISCS (SEE FIG C1-C3) Put the inner flange onto the tool spindle. Ensure it is located on the two flats of spindle (SEE FIG C1). Place the disc on the tool spindle and inner flange. Ensure it is correctly located. Fit the threaded outer flange making sure it is facing in the correct direction for the type of disc fitted.
- Page 12 Operating Instructions 6. SAFETY LOCK-OFF SWITCH (SEE FIG E) Your switch is locked off to prevent accidental starting. With your hand on the on/off switch (a) use your finger to push lever (b) forward and then depress on/off switch (a). Then release lever (b).
-
Page 13: Working Hints For Your Angle Grinder
Working Hints For Your Angle Grinder 1. Always start at no load to achieve maximum speed then start working. 2. Do not force the disc to work faster, reducing the Disc’s moving speed means longer working time. 3. Always work with a 15-30 angle between disc and workpiece. Larger angles will cut ridges into the workpiece and affect the surface finish. -
Page 14: Trouble Shooting
Trouble Shooting Although your new angle grinder is really very simple to operate, if you do experience problems, please check the following: 1. If your grinder will not operate check the power at the main plug. 2. If your grinder wheel wobbles or vibrates, check that outer flange is tight, check that the wheel is correctly located on the flange plate. -
Page 15: Environmental Protection
Technical Data Vibration Information Vibration total values (triax vector sum) determined according to EN 60745: Vibration emission value a = 6.098 m/s h,AG Surface grinding Uncertainty K =1.5m/s² – The declared vibration total value has been measured in accordance with a standard test method and may be used for comparing one tool with another;... -
Page 16: Guarantee
Your statutory rights remain unaffected. Issue1 08/2015 Declaration of Conformity This Guild 1050W 125mm Angle Grinder model number PGA125G fully complies with the Machinery Directive 2006/42/EC, Electromagnetic Compatibility Directive 2004/108/ EC(before 2016/04/20) and 2014/30/EC(since 2016/04/20), RoHS Directive 2011/65/EU and... -
Page 17: Plug Replacement (Uk & Ireland Only)
Plug Replacement (Uk & Ireland Only) If you need to replace the fitted plug then follow the instructions below. IMPORTANT The wires in the mains lead are colored in accordance with the following code: Blue – Neutral Brown – Live As the colors of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows.