The Basic Connection - RCA F19625 User Manual

Setup and Connections

The Basic Connection

The basic connection below (TV and VCR) is the most common
connection and is therefore used to illustrate a single component
connection with your TV. For better sound and picture quality and
multiple component connection information refer to the next section,
Advanced Connections.
Cables
You will use the following type of cable to make your connection:
Coaxial Cables: In this connection, two Coaxial
Cables are used: one connects from an antenna,
cable, or cable box to the VCR, and one connects
from the VCR to the TV. These cables carry both
audio and video signals.
How to View the VCR
To watch the VCR in this connection tune TV to Channel 3 or 4.
Later, in the Interactive Setup section you will program the TV to
CABLE, CABLE BOX, OR automatically tune to Channel 3 or 4 when you turn on the VCR.
CABLE, CABLE BOX, OR ANTENNA
VCR 1
OUT
VIDEO
AUDIO
TV
AUDIO
VIDEO
L
R
R
L
G-LINK
Once you have completed this connection you may skip to Step 3.
IN FROM ANT
CH3
CH4
OUT TO TV
IN
OUT
CABLE/
ANTENNA
S-VIDEO
Please note that the S-VIDEO and Audio R
and L OUT jacks are not available for
models F20625 and F19625.
5