Power Controls & Operation - Kangaroo Hillcrest ABX Manual

Power Controls and Operation
Accelerator
Speed is controlled by the Accelerator located between the handle grips. The decal indicates speed in relation to
the Accelerator position. (Figure 8)
Note: Turning the Accelerator all the way down does not turn off Power Controls, even if your X-Series is not moving.
There is a feature, known in technical terms as "ramp up", that automatically provides a gentle start at any setting
up to, and including, full speed. Even so, your X-Series is very powerful, and it is best to start out at lower speeds.
Function Switch
The Function Switch is located on the top center of the handle. (Figure 9)
• Switch to the MANUAl mode when remote control is not desired.
• Switch to REMOTE mode when you are ready to resume play with Remote Guidance.
18