Advertisement
Quick Links
FCC Information
Safety Information
English
For Your Safety
FCC Information
This device complies with Part 15 of the FCC
This Class B digital apparatus complies with
The AC power plug is polarized
(one blade is wider than the
Rules. Operation is subject to the following two
Canadian ICES-003.
conditions: (1) This device may not cause harmful
other) and only fits into AC
Cet appareil numérique de la class B est
power outlets one way. If the
interference, and (2) this device must accept any
conforme à la norme de NMB-003 du Canada.
interference received, including interference
plug will not go into the outlet
completely, turn the plug over
that may cause undesired operation.
In accordance with FCC requirements, changes
and try to insert it the other
way. If it still does not fit, contact a qualified
or modifications not expressly approved by
Thomson Inc. could void the user's authority to
electrician to change the outlet, or use a
different one. Do not attempt to bypass this
operate this product.
This device generates and uses radio frequency
safety feature.
(RF) energy, and if not installed and used
properly, this equipment may cause interference
For Your Records
to radio and television reception.
I
n the event that service should be required, you
If this equipment does cause interference to
may need the model number. In the space
radio or television reception (which you can
below, record the date and place of purchase:
determine by unplugging the unit), try to correct
the interference by one or more of the following
Date of Purchase:
measures:
• Re-orient the receiving antenna (that is, the
Place of Purchase:
antenna for the radio or television that is
"receiving" the interference).
• Move the unit away from the equipment that
Service Information
is receiving interference.
• Plug the unit into a different wall outlet so
This product should be serviced only by those
that the unit and the equipment receiving
specially trained in appropriate servicing
interference are on different branch circuits.
techniques. For instructions on how to obtain
CAUTION
If these measures do not eliminate the
service, refer to the warranty included in this
RISK OF ELECTRIC SHOCK
interference, please consult your dealer or an
Guide.
DO NOT OPEN
experienced radio/television technician for
T H E
L I G H T N I N G
CAUTION: TO REDUCE THE
THE EXCLAMATION
FLASH AND ARROW-
RISK OF ELECTRIC SHOCK,
POINT WITHIN THE
additional suggestions. Also, the Federal
HEAD WITHIN THE
D O N O T R E M O V E C O V E R
T R I A N G L E I S A
T R I A N G L E I S
A
( O R B A C K ) . N O U S E R -
WARNING
SIGN
Communications Commission has prepared a
W A R N I N G
S I G N
ALERTING YOU OF
S E RV I C E A B L E PA R T S I N -
helpful booklet, "How To Identify and Resolve
ALERTING YOU OF
S I D E . R E F E R S E RV I C I N G
I M P O R T A N T
" D A N G E R O U S
T O Q U A L I F I E D S E R V I C E
I N S T R U C T I O N S
Radio TV Interference Problems." This booklet
VOLTAGE" INSIDE
PERSONNEL.
A C C O M PA N Y I N G
THE PRODUCT.
T H E
P R O D U C T.
is available from the U.S. Government Printing
SEE MARKING ON BOTTOM / BACK OF PRODUCT
Office, Washington, DC 20402. Please specify
stock number 004-000-00345-4 when ordering
WARNING:
TO PREVENT FIRE OR ELECTRICAL
The descriptions and characteristics in this owner's manual are for the purpose of general reference only and not
SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT
as a guarantee. In order to provide you with the highest quality product, we may make changes or modifications
copies.
TO RAIN OR MOISTURE.
without prior notice. The English version serves as the final reference on all product and operational details
This product complies with DHHS rules 21CFR
should any discrepancies arise in other languages.
subchapter J. appliable at date of manufacture.
Before You Begin
General Controls
Plugging In For Power
Power Failure Indicator
AC OUTLET POWER SUPPLY:
When AC power is interrupted (disconnected)
for a short period of time, both time and
120V~60Hz
alarm settings will change (unless batteries
are installed). After AC power is restored
Battery Back-Up Operation
(reconnected), the Digital Display will blink to
The power failure protection circuit will
indicate that power was interrupted and you
not operate unless battery is installed.
should readjust the time and alarm settings.
When the battery backup functions, the
digital display will not light, however, the
wake function still occurs during the
power interruption if remaining battery
Note:
Note:
Note:
Note:
Note:
power is adequate.
Alkaline (NEDA 1604A/IEC
Normal operation will resume after AC
6LR61) batteries are recommended.
power is restored so you will not have to
Carbon-zinc battery may be used but
reset the time or wake.
memory holding time will be
substantially reduced. Memory holding
Install battery as follow:
time for a fresh alkaline battery is
1. Remove battery compartment door
approximately 8 hours (if radio or
(located at the bottom of the radio)
GEFAHR EINES
ELEKTRISCHEN SCHLAGS
by applying thumb pressure to the
alarm are not operated) which should
tab on battery door and then lift the
take care of short, nuisance-type AC
door out and off the cabinet.
power failures. To preserve battery
2. Connect a 9-volt battery (not supplied)
life, the unit should remain plugged
to the connector plug.
into an AC outlet. As the battery gets
3. Replace the compartment door.
older, its voltage drops and memory
may be lost. Be sure to replace the
battery periodically. Battery should be
removed if the unit will be stored for
more than one month. Leaky battery
can badly damage the clock radio.
Wake Function
Wake Function
Setting Wake Time
Checking Wake Time
SmartSnooze
This unit allows two wake times to be set.
Press SET repeatedly until you see WAKE 1 or
This operation allows extra sleep time
1. Press SET repeatedly on the top of the
WAKE 2 on the display, the currently set
after the wake function is on. The alarm
unit until you see WAKE 1 or WAKE 2
wake time will show as well.
will be off by pressing SNOOZE, NAP,
flashes on the display.
SLEEP, REV or FWD until the snooze
2. Press REV or FWD to set the respective
period is over. Snooze function can be
Turning Off the Wake Alarm,
wake time. The time decrements or
used repeatedly up to 30 minutes (default:
Radio or CD
increments will follow by a faster rate
9 minutes). After this, the wake function
when you press and hold the buttons.
Press SNOOZE on the top of the unit. The
will turn off until the next day.
3. Press SET repeatedly until you see no
wake alarm or radio will be switched off
Set the "quiet" period as follow:
WAKE 1, WAKE 2 or
icon the
temporarily. The alarm, radio or CD will be on
display.
again when the snooze period is over. (see
1. Press and hold SNOOZE.
"SmartSnooze
TM
Operation")
2. Press REV or FWD to set the quiet
Selecting Wake Source
You may be woken up by radio, CD or alarm.
To turn off the wake alarm, radio or CD
completely, press OFF. The wake alarm or
1. If your desired wake source is radio or
radio will activate again the next day unless
CD:
you switch off the Wake function (see
• Wake by radio - select an AM or FM
Sleep Function
"Switching off Wake Function").
station (see directions on "Radio").
• Wake by CD - insert a CD in the CD
compartment. If you want to be
Tip: The unit equips with GRAD-
GRAD-
GRAD-
GRAD-
GRAD-
woken up by a specific track on the
In sleep mode, you can set the duration
CD, press and hold wake up - cd
U-WAKE
U-WAKE feature, the alarm tone
U-WAKE
U-WAKE
U-WAKE
(up to 2 hours) before the radio or CD
track on the top of the unit and at the
volume will increase gradually to
turn off automatically.
same time press REV or FWD to select
its maximum in about 30 to 45
a desired track.
1. While listening to radio or CD, press
seconds.
2. Set a wake time (see above direction).
3. Press WK-1 or WK-2 repeatedly at the
front of the unit to select a waking
mode. Corresponding icon lights on
the front of the unit.
- Wake 1 by alarm
- Wake 1 by radio
- Wake 1 by CD
In case of Wake 2, "2" shows at the
centre of the icons.
Important Information
Technical Information
• Make sure that you keep your set
away from water and high
Product: Clock Radio with CD Player
temperatures.
Brand: RCA
• Do not use your System immediately
Model: RP5600
after transporting it from a cold place
to a warm place, as condensation may
Electrical Consumption
cause the system to malfunction.
Power Supply: 120V ~ 60Hz
• Keep your unit away from humid
Power Consumption: 13 Watts
areas and abnormally hot places.
• To prevent personal injury, do not
IMPORTER
Comercializadora Thomson de México, S.A. de C.V.
reverse any batteries.
• The use of apparatus in moderate
Álvaro Obregón No. 151. Piso 13.
Col. Roma. Delegación Cuauhtémoc
climates.
C.P. 06700. México, D.F.
• The apparatus shall not be exposed to
Telefono: 52-55-11-020360
dripping or splashing and that no
RFC: CTM-980723-KS5
objects filled with liquids, such as
vases, shall be placed on the
apparatus.
• No naked flame sources, such as
lighted candles, should be placed on
the apparatus.
• Attention should be drawn to the
environmental aspects of battery
disposal.
• Minimum distances (2cm) around the
apparatus for sufficient ventilations.
• The ventilation should not be
impeded by covering the ventilation
opening with items, such as
newspaper, table-cloths, curtains, etc.
• The rating plate is located at the
bottom cabinet of apparatus.
General Controls
Front View
OFF - turns the unit on or off.
WK-1 & WK-2 - activates and sets Wake 1 and
Wake 2 function respectively.
NAP - activates nap function.
SLEEP - activates sleep function.
Top View
CD OPEN - lift to open the CD compartment
door.
STOP - stops CD playback.
PLAY/PAUSE - starts and pauses CD playback.
wake up - cd track - selects CD wake track.
CD MODE - selects CD mode.
SET - enters clock and wake time setting
mode.
Brightness Control
REV
& FWD
- set time and select CD
track.
SNOOZE - enters snooze mode where the
alarm will quiet but sound again once the
Clock time and CD playback information
snooze period is over.
are display on the display area at the
ON - turns radio on and selects AUX input
front of the unit. Slide BRIGHTNESS
mode.
switch on the left of the unit to HI (high)
or LO (low) position to adjust the
brightness.
Nap Function
This function wakes you up after a short
TM
Operation
Switching Off Wake Function
period of time (from 10 minutes to 2
Press WK-1 or WK-2 repeatedly at the front
hours).
of the unit until no wake mode icon shows on
the display.
1. Press NAP once at the front of the unit
and while the NAP icon is flashing on
the display, press REV or FWD to set
the duration up to 2 hours (each press
decreases or increases duration by 10
minutes).
2. The clock time shows after a few
seconds if no button is pressed. NAP
icon shows on the display to indicate
the function is activated.
period. The time decrements or
increments will follow by a faster rate
when you press and hold the buttons.
2. To check the remaining duration before
the radio or CD turns off, press and hold
SLEEP.
3. To cancel the sleep function, press
SNOOZE or OFF.
and hold SLEEP at the front of the
unit and use REV or FWD to set the
duration up to 2 hours. The time
decrements or increments will follow
by a faster rate when you press and
hold the buttons.
Ecology
Help protect the environment - we
recommend that you dispose of used
batteries by putting them into specially
designed receptacles.
Maintenance
Clean the unit with a soft cloth, or a damp
chamois leather. Never use solvents.
IMPORTADOR
Comercializadora Thomson de México, S.A. de C.V.
Álvaro Obregón No. 151. Piso 13.
Col. Roma. Delegación Cuauhtémoc
C.P. 06700. México, D.F.
Telefono: 52-55-11-020360
RFC: CTM-980723-KS5
EXPORTER
Thomson Inc.
P.O. Box 1976
Indianapolis, IN 46206 - 1976
©2006 Thomson Inc.
Trademark(s) ® Registered
Marque(s) ® Deposée(s)
Marca(s) ® Registrada(s)
www.rca.com
Printed in China / Impreso en China
5626 4380 (EN/E)
Clock
Setting Clock
1. Press SET repeatedly until a clock icon
shows on the display.
Left View
2. Press REV or FWD to set the clock
BRIGHTNESS - selects display brightness
time. The time decrements or
between high and low.
increments will follow by a faster rate
-VOLUME+ - adjusts volume.
when you press and hold the buttons.
AUX IN - AUX input jack.
AM or PM icon will also show beside
the time.
3. Press SET when finished.
Radio
Selecting Radio Mode
Right View
AM Antenna
A built-in ferrite rod antenna eliminates the
BAND - selects between AM and FM bands.
Press ON to switch on radio.
need for an outside antenna for AM
TUNING - selects radio frequencies.
reception. Rotating the unit slightly may
Switching Band
improve reception of distant AM stations.
Slide the BAND switch on the right of the
unit to select FM or AM band.
Listening to Auxiliary Source
1. Connect your auxiliary source (e.g. mp3
Tuning the Radio
Turn the TUNING knob on the right of the
unit to adjust radio frequency.
2. Start playback from your auxiliary source.
3. Press ON to switch to listen to auxiliary
Built-In AFC
The Built In Automatic Frequency Control
(AFC) works only on FM. It helps reducing
drift on FM reception and keeping the
radio locked in on the FM station to which
it is tuned.
When tuning in FM stations, you may
notice that the station you are tuning can
be well-tuned on two or three nearby
points on the dial. Always tune carefully
at the loudest and clearest point.
Limited Warranty (United
incorporated into other products.
• Products purchased or serviced outside the USA.
States)
• Acts of nature, such as but not limited to lightning
damage.
What your warranty covers:
Limitation of Warranty:
• Defects in materials or workmanship.
3. To check remaining nap time, press NAP
• THE WARRANTY STATED ABOVE IS THE ONLY
For how long after your purchase:
once to show the time on the display
WARRANTY APPLICABLE TO THIS PRODUCT. ALL
• One year from date of purchase.
briefly.
OTHER WARRANTIES, EXPRESS OR IMPLIED
The warranty period for rental units begins with
4. When the alarm sounds, press SNOOZE to
the first rental or 45 days from date of shipment to
(INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A
switch it off.
the rental firm, whichever comes first.
What we will do:
PARTICULAR
• To cancel the function before the nap
• Provide you with a new, or at our option, a
DISCLAIMED.
time ends, press and hold NAP until no
refurbished unit. The exchange unit is under
INFORMATION GIVEN BY THOMSON INC., ITS
NAP icon shows on the display.
warranty for the remainder of the original
AGENTS OR EMPLOYEES SHALL CREATE A
product's warranty period.
GUARANTY OR IN ANY WAY INCREASE THE
• Proof of purchase in the form of a bill of sale or
SCOPE OF THIS WARRANTY.
receipted invoice which is evidence that the
• REPAIR OR REPLACEMENT AS PROVIDED
product is within the warranty period must be
presented to obtain warranty service. For rental
UNDER THIS WARRANTY IS THE EXCLUSIVE
firms, proof of first rental is also required.
REMEDY OF THE CONSUMER. THOMSON INC.
How to make a warranty claim:
SHALL NOT BE LIABLE FOR INCIDENTAL OR
• Properly pack your unit. Include any cables, etc.,
CONSEQUENTIAL DAMAGES RESULTING FROM
which were originally provided with the product.
THE USE OF THIS PRODUCT OR ARISING OUT OF
We recommend using the original carton and
ANY BREACH OF ANY EXPRESS OR IMPLIED
packing materials.
WARRANTY ON THIS PRODUCT.
• Include evidence of purchase date such as the bill
DISCLAIMER OF WARRANTIES AND LIMITED
of sale. Also print your name and address and a
WARRANTY ARE GOVERNED BY THE LAWS OF
description of the defect. Send via standard UPS
THE STATE OF INDIANA. EXCEPT TO THE EXTENT
or its equivalent to:
Thomson Inc.
PROHIBITED BY APPLICABLE LAW, ANY IMPLIED
Product Exchange Center
WARRANTY OF MERCHANTABILITY OR FITNESS
11721 B Alameda Avenue
FOR A PARTICULAR PURPOSE ON THIS PRODUCT
Socorro, Texas 79927
IS LIMITED TO THE APPLICABLE WARRANTY
• Insure your shipment for of loss or damage.
PERIOD SET FORTH ABOVE.
Thomson accepts no liability in case of damage or
How state law relates to this warranty:
loss en route to Thomson.
• Some states do not allow the exclusion nor
• Pay any charges billed to you by the Exchange
limitation of incidental or consequential damages,
Center for service not covered by the warranty.
or limitations on how long an implied warranty lasts,
• A new or refurbished unit will be shipped to you
freight prepaid.
so the above limitations or exclusions may not apply
What your warranty does not cover:
to you.
• Customer instruction. (Your Owner's Manual
• This warranty gives you specific legal rights, and
provides information regarding operating
you also may have other rights that vary from state
Instructions and user controls. For additional
to state.
information, ask your dealer.)
If you purchased your product outside the USA:
• Installation and set-up service adjustments.
This warranty does not apply. Contact your dealer
• Batteries.
for warranty information.
• Damage from misuse or neglect.
• Products which have been modified or
EN/E
It is important to read this instruction book prior to using your new product for the first time.
Es importante leer este manual antes de usar por vez primera su euipo.
CD Player
Selecting Playback Mode
Listening to CD
1. Lift CD OPEN to open the CD
During CD playback, press CD MODE
compartment door.
repeatedly to select one of the following
2. Insert a disc and close the door.
mode with corresponding icon shows on the
3. Press PLAY/PAUSE to start playback.
display.
• Press PLAY/PAUSE to pause playback
and press again to resume.
4. Adjust volume to your desired level.
5. Press REV or FWD to skip backward or
forward a track. Press and hold to
search through a track.
6. Press STOP to stop playback.
Note: When there is no disc in the
compartment, "cd" flashes on the display.
player) to the AUX input jack on the left
side of the unit.
source. The AUX indicator on the front
will turn on. Press again to switch back to
listen to the radio.
PURPOSE)
ARE
HEREBY
NO VERBAL OR WRITTEN
THIS
u s e r
m a n u a l
RP5600
- repeats current track,
- repeats the whole disc,
- plays tracks randomly,
- repeats the whole disc and plays
randomly.
Advertisement
