RCA RP5640 User Manual

FCC Information Safety Information
English
For Your Safety
FCC Information
This device complies with Part 15 of the FCC The AC power plug is polarized
This Class B digital apparatus complies with
(one blade is wider than the
Rules. Operation is subject to the following two
Canadian ICES-003.
conditions: (1) This device may not cause harmful other) and only fits into AC
Cet appareil numérique de la class B est
power outlets one way. If the
interference, and (2) this device must accept any
conforme à la norme de NMB-003 du Canada.
interference received, including interference plug will not go into the outlet
completely, turn the plug over
that may cause undesired operation.
In accordance with FCC requirements, changes and try to insert it the other
way. If it still does not fit, contact a qualified
or modifications not expressly approved by
Thomson Inc. could void the user's authority to electrician to change the outlet, or use a
CAUTION
different one. Do not attempt to bypass this
operate this product.
RISK OF ELECTRIC SHOCK
This device generates and uses radio frequency DO NOT OPEN safety feature.
T H E L I G H T N I N G CAUTION: TO REDUCE THE THE EXCLAMATION
(RF) energy, and if not installed and used
FLASH AND ARROW- RISK OF ELECTRIC SHOCK, POINT WITHIN THE
properly, this equipment may cause interference HEAD WITHIN THE D O N O T R E M O V E C O V E R T R I A N G L E I S A For Your Records
T R I A N G L E I S A
( O R B A C K ) . N O U S E R - WARNING SIGN
to radio and television reception. W A R N I N G S I G N S E RV I C E A B L E PA R T S I N - ALERTING YOU OF
I
ALERTING YOU OF S I D E . R E F E R S E RV I C I N G I M P O R T A N T n the event that service should be required, you
If this equipment does cause interference to
" D A N G E R O U S T O Q U A L I F I E D S E R V I C E I N S T R U C T I O N S
may need the model number. In the space
VOLTAGE" INSIDE PERSONNEL. A C C O M PA N Y I N G
radio or television reception (which you can THE PRODUCT. T H E P R O D U C T.
below, record the date and place of purchase:
determine by unplugging the unit), try to correct
SEE MARKING ON BOTTOM / BACK OF PRODUCT
the interference by one or more of the following
WARNING: Date of Purchase:
TO PREVENT FIRE OR ELECTRICAL
measures:
SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT
• Re-orient the receiving antenna (that is, the TO RAIN OR MOISTURE.
Place of Purchase:
antenna for the radio or television that is
"receiving" the interference).
• Move the unit away from the equipment that
Service Information
is receiving interference.
IMPORTADOR
• Plug the unit into a different wall outlet so
This product should be serviced only by those
Comercializadora Thomson de México, S.A. de C.V.
that the unit and the equipment receiving
Álvaro Obregón No. 151. Piso 13. specially trained in appropriate servicing
interference are on different branch circuits.
Col. Roma. Delegación Cuauhtémoc techniques. For instructions on how to obtain
If these measures do not eliminate the
C.P. 06700. México, D.F. service, refer to the warranty included in this
interference, please consult your dealer or an
Telefono: 52-55-11-020360 Guide.
experienced radio/television technician for RFC: CTM-980723-KS5
additional suggestions. Also, the Federal
Communications Commission has prepared a
EXPORTER
helpful booklet, "How To Identify and Resolve
Thomson Inc.
Radio TV Interference Problems." This booklet
P.O. Box 1976
is available from the U.S. Government Printing
Indianapolis, IN 46206 - 1976
Office, Washington, DC 20402. Please specify ©2006 Thomson Inc.
stock number 004-000-00345-4 when ordering Trademark(s) ® Registered
The descriptions and characteristics in this owner's manual are for the purpose of general reference only and not
Marque(s) ® Deposée(s)
copies.
as a guarantee. In order to provide you with the highest quality product, we may make changes or modifications
Marca(s) ® Registrada(s)
This product complies with DHHS rules 21CFR
without prior notice. The English version serves as the final reference on all product and operational details
www.rca.com
subchapter J. appliable at date of manufacture.
should any discrepancies arise in other languages.
Printed in China / Impreso en China
General Controls Clock
Please refer to the actual unit when Before You Plug for Power
AUDIO-IN - selects auxiliary audio input
reading the instructions below: mode.
1. Setting Time Zone
SLEEP - activates SLEEP function.
You may slide the time zone selector at
Front View SET CLOCK / WAKE - sets clock time and
the bottom of the unit to 1) Eastern,
wake setting.
WAKE UP CD TRACK / STATION- sets the
GEFAHR EINES 2) Central, 3) Mountain or 4) Pacific. (refer
REV / FWD - change time / radio frequency / ELEKTRISCHEN SCHLAGS
wake up radio station or CD track.
to the maps on the right)
CD track
- selects repeat 1 / repeat all / shuffle
INSTANT WEATHER - recalls available
/ repeat shuffle in CD mode.
2. Day Light Saving
weather stations.
- skips / searches backward.
You can press and hold for a few seconds
- starts / pauses CD playback.
the day light saving switch at the bottom
Bottom View
- skips / searches forward.
of the unit to turn on/ off in areas
- stops CD playback.
1 2 3 4 - slide to select different time zone.
. . . .
observing/ not observing such time
OFF - turns off the radio / alarm / CD
DAYLIGHT SAVING TIME - Press and hold for
change.
RECALL - recalls available preset radio
a few seconds to turn on / off the Daylight
WARNING: Please avoid playing with
stations.
Saving function.
these buttons after entering the
MEMO/SET - sets and stores preset
Battery compartment - see "Battery Back-up
Clock/Alarm set mode.
memory in radio mode.
Operation".
SNOOZE - turns off the alarm
Auto Clock Set
momentarily. Back View
You do not have to set the clock time as a
VOLUME - decreases volume.
AUDIO-IN - auxiliary audio input jack.
built-in automatic time set system is
VOLUME - increases volume.
COLOR SELECT - press to toggle among 4
equipped in this clock powered by 3V (2
RADIO ON/BAND - turns on the radio /
backlight colors.
X AA batteries (included). All you have to
changes radio band.
AUTO DIMMER - turns on / off the auto
do is to plug this clock for power and
dimmer function.
current time will be shown automatically.
Top View
However, the batteries can also be
OPEN / CLOSE - opens / closes the CD Listening to Auxiliary Source
exhausted and we recommend that you
compartment.
1. Connect auxiliary input source (e.g. mp3 replace the batteries every 2-3 years. In
WAKE 1 - activates/inactivates WAKE 1
player) with a line-in cable (included) to case the memory holding batteries are
setting, press repeatedly to cycle wake
the AUDIO IN jack of the unit. accidentally removed, you may set the
mode: 2. Press AUDIO IN to select auxiliary input clock manually with following procedures:
mode with AUDIO-IN shows on the
WAKE 2 - activates/inactivates WAKE 2
display. 1. Be sure Time Zone and Daylight Saving
setting, press repeatedly to cycle wake
3. Adjust volume by pressing VOLUME
mode:
, control other playback operations
NAP - sets the alarm to sound after a
on the auxiliary unit. 2. Press SET CLOCK/WAKE repeatedly
specific period of time. (Alarm tone only)
CD Player Wake Function Wake Function
Listening to Compact Disc Selecting Play Mode Waking to CD
When the waking to CD is selected,
1. Press OPEN/CLOSE to open the CD 1. Start CD playback.
compartment. icon will light.
2. Press to toggle between different
2. Insert a disc, press OPEN/CLOSE to 1. Press
play modes.
close the CD compartment door. 2. Set the wake time.
3. Press . 3. Press WAKE 1 or WAKE 2 to select
- repeats the current track.
4. Press VOLUME + / - to adjust to your
- repeats the whole disc.
desired listening level.
- plays tracks randomly.
5. Press or to skip backward or 4. Press VOLUME + / - to adjust to your
- plays random track repeatedly.
forward the CD track.
5. Press OFF to stop the CD playback.
6. Press and hold or to search
backward or forward within the CD
You can select your CD wake up track by
track.
the following procedures.
7. Press to stop CD playback.
1. In CD mode, while pressing WAKE UP
Wake Function
2. Release WAKE UP CD TRACK /
Setting the Wake Time Selecting Wake Mode
1. Press SET CLOCK/WAKE repeatedly To change to another wake mode (e.g. from
3. To reset the CD wake up track, follow
CD to radio), simply press WAKE 1 or WAKE
until or icon shows on
WAKE 1 WAKE 2
2 repeatedly to scroll through wake options.
the display.
2. Press REV or FWD to set the wake
Note: If the CD compartment is empty,
time. The time decrements or
Waking to Alarm Tone
the alarm tone will sound instead even
increments will follow by a faster rate
the WAKE TO CD mode is selected.
when you press and hold either REV or When waking to alarm tone is selected, /
FWD.
icon will light.
Waking to RADIO
3. Press SET CLOCK/WAKE repeatedly to You cannot adjust the alarm tone with
When the waking to radio is selected,
exit setting wake time mode. Or else volume.
the unit will exit setting wake time • When the AC power is disconnected, the
1. Press RADIO ON/BAND to turn on the
mode when no button is pressed unit will enter DC backup mode, all wake
within 5 seconds. mode will be reverted to alarm tone.
2. Set the wake time .
• The unit equips with GRAD-U-WAKE
3. Press WAKE 1 or WAKE 2 to select
feature, the alarm tone volume will
increase gradually to its maximum in
about 30 to 45 seconds.
Important Information
Technical Information • Make sure that you keep your set
away from water and high
Product: Clock Radio with CD player
temperatures.
Brand: RCA
• Do not use your system immediately
Model: RP5640
after transporting it from a cold place
to a warm place, as condensation may
Electrical Consumption
cause the system to malfunction.
Power Supply: 120V ~ 60Hz
• Keep your unit away from humid
Power Consumption: 22 Watts
areas and abnormally hot places.
• To prevent personal injury, do not
IMPORTER
Comercializadora Thomson de México, S.A. de C.V. reverse any batteries.
• The use of apparatus in moderate
Álvaro Obregón No. 151. Piso 13.
Col. Roma. Delegación Cuauhtémoc climates.
C.P. 06700. México, D.F. • The apparatus shall not be exposed to
Telefono: 52-55-11-020360
dripping or splashing and that no
RFC: CTM-980723-KS5
objects filled with liquids, such as
vases, shall be placed on the
apparatus.
Main plug is used as the disconnect device, it shall
remain readily operable and should not be • No naked flame sources, such as
obstructed during intended used. To be
lighted candles, should be placed on
completely disconnected the apparatus from
the apparatus.
supply mains, the main plug of the apparatus
• Attention should be drawn to the
shall be disconnected from the mains socket
environmental aspects of battery
outlet completely.
disposal.
• Minimum distances (2cm) around the
apparatus for sufficient ventilations.
• The ventilation should not be
impeded by covering the ventilation
opening with items, such as
newspaper, table-cloths, curtains, etc.
• The rating plate is located at the
bottom cabinet of apparatus.
Clock
US Time Zones
3. Press REV or FWD to set the time. Press
and hold the respective buttons
to fast reverse or fast forward clock
time.
4. Clock time will automatically be
saved if no buttons are pressed after
a few seconds. You can also press SET
CLOCK/WAKE once to save your setting
and exit clock set mode.
Display
Auto Dimmer
Slide the AUTO DIMMER switch at the back
of the unit to the ON position. The brightness
of the LCD display will vary automatically
Canadian Time Zones
according to the environment.
Slide to the OFF position, the display will
remain at its brightest level.
Backlight Color Select
You can choose among 4 different backlight
color - blue, green, white and amber.
1. Before a specific color is set, the backlight
color will keep changing.
2. Press Color Select at the back of the unit
to toggle among different backlight color.
3. If the AC power and backup batteries are
removed, the 4 backlight colors will
starting changing again once the AC
power is resumed.
Time is adjusted before operating the
clock.
until the clock setting icon is
displayed.
Wake Function
4. Press VOLUME + / - to adjust to your
desired wake up volume.
/
5. Press OFF to turn off the radio.
to turn on the CD.
You can select your wake up radio station by
going to bed, we advise using Waking
the following procedures.
to Alarm Tone mode to wake you up
1. Press RADIO ON/BAND to turn on the
waking up by CD, / will light
since the volume will automatically
radio and select the band.
accordingly.
2. Press REV or FWD to tune to your desired
increase.
radio station.
desired wake up volume.
3. Press and hold WAKE UP CD TRACK /
SmartSnooze
STATION to store the current radio station
as the wake up radio station. will
This operation allows extra sleep time
show on the display.
after the wake function is on. The alarm
Note: "AL" refers to the Alarm Station. If no will be off by pressing SNOOZE, SLEEP,
WAKE STATION is set, the wake up radio AUDIO-IN, NAP, WAKE 1, WAKE 2,
CD TRACK / STATION, press REV or
station will stay at your last listening radio SET, INSTANT WEATHER or OPEN/
FWD to select your desired CD wake
station. CLOSE until the snooze period is over.
up track.
Snooze function can be used repeatedly
You can cancel your wake up radio station by
up to 30 minutes (default: 9 minutes).
STATION, and the CD wake up track is
the following procedures.
After this, the wake function will turn off
set.
1. Press RADIO ON/BAND to turn on the
until the next day.
radio.
the above procedures and set the CD Set the "quiet" period as follow:
2. Press RECALL repeatedly to select the
wake up track to 1.
wake up radio station. While pressing SNOOZE, press REV or
3. Press and hold MEMO/SET to cancel the FWD to set the "quiet" period (the
wake up radio station. default time is 9 minutes) from 1 minute
to 30 minutes. Release SNOOZE, then the
"quiet" period is set.
Note: Whenever the unit is in wake up
/
setting mode and wake up on mode, the
icon will light.
backlight color will changed into red,
regardless of the previously set backlight
radio.
color.
waking up by RADIO / will light
accordingly.
Before You Begin
Ecology
Plugging In For Power
Help protect the environment - we
AC OUTLET POWER SUPPLY:
recommend that you dispose of used
120V~60Hz
batteries by putting them into specially
designed receptacles.
Battery Back-Up Operation
This clock radio is equipped with a
Maintenance
memory holding system that can be
Clean the unit with a soft cloth, or a damp
powered with 2 "AA" batteries (included
chamois leather. Never use solvents.
and installed). The power failure
protection circuit will not operate unless
battery is installed. When normal
Precautions
household power is interrupted, or AC line
• Never open the cabinet under any
cord is unplugged, the batteries will
circumstances. Any repairs or internal
power the clock radio to keep track of
adjustments should be made only by a
time and alarm settings programmed into
trained technician.
memory. When the battery backup
• Warning: Never operate this product with
functions, the digital display will not light,
the cabinet removed.
however, the function of alarm still occurs
• The CD player of this unit uses a laser to during the power interruption if
read the music on the disc. The laser remaining battery power is adequate.
mechanism corresponds to the cartridge Normal operation will resume after AC
and stylus of a record player. Although
power is restored so you will not have to
this product incorporates a laser pick-up
reset the time or the alarm.
lens, it is completely safe when operated
according to directions.
Replace batteries as follow:
• Discs rotate at high speed inside the
1. Remove battery compartment door
player. Do not use damaged, warped or
(located at the bottom of the radio)
cracked discs.
by applying thumb pressure to the
• Do not touch the pick-up lens which is
tab on battery door and then lift the
located inside the disc compartment. Also, door out and off the cabinet.
to keep dust from collecting on the pick- 2. Replace 2 AA batteries.
up lens, do not leave the compartment
3. Replace the compartment door.
door open for an extended period of time.
Note: we recommend that you replace the
batteries every 2-3 years.
Radio
Using the Weather Band
Weather information is given continuously
from U.S. Government Weather Stations
on frequencies from 162.4MHz to
162.55MHz. The Weather transmission,
broadcast 24 hours a day, are taped
messages that are repeated every 4 to 6
minutes and revised and updated as
needed to match the changing weather
conditions. For additional information,
check your location office of the National
Weather Service (Department of
Commerce).
4
1. Press INSTANT WEATHER to access
3
Weather Bands with strong signals to
the unit.
2. Press REV or FWD to select among the
2
1
7 weather channels.
3. Wx and the corresponding channel
number will show on the display.
IMPORTANT:
The listening range of NOAA weather
stations varies from 10 miles up to a
maximum of 40 miles from the station's
transmitter. In some areas of the United
States, weather transmissions cannot be
monitored. The effective range of this
radio will have side variations due to the
height of the local transmitting antenna,
atmospheric conditions, and the terrain
between the transmitter and your radio's
location.
Weather band: CH 1 - 162.550 MHz, CH 2
- 162.400 MHz, CH 3 - 162.475 MHz, CH 4 -
162.425 MHz, CH 5 - 162.450 MHz, CH 6 -
4 3 2 1
162.500 MHz, CH 7 - 162.525 MHz
NAP & Sleep Function
NAP Mode
Turning off Wake Function
Tip: Tip: Tip: Tip: Tip:
For catnaps up to 2 hours without
1. Silence the alarm momentarily
Press SNOOZE. The alarm will sound again disturbing the regular alarm settings, the
If you set the Wake function
when the snooze period is over. (see NAP function wakes you up after a short
with low volume level before
period of time. Simply:
"SmartSnooze TM " section).
1. Press NAP, the NAP indicator will flash.
While the NAP indicator is flashing,
2. Stop the alarm
press REV or FWD to adjust nap time.
Press OFF and the alarm will be on again the
The time range is from 10 minutes to 2
following day at the same time.
hours at 10 minutes interval (default is
20 minutes).
3. Disable the alarm permanently
TM
2. Wait 3 seconds or press NAP again to
• Press WAKE 1 or WAKE 2 repeatedly
until no corresponding wake indicator confirm, the NAP indicator will show
on the display.
(e.g. / / ) shows on the display.
3. Press NAP once to show time left, after
• To activate the wake function again, press
3 seconds, the display will return to
WAKE 1 or WAKE 2 repeatedly until a
clock time.
desired wake mode indicator shows on
Note:
the display. The previously set wake time
• Only alarm tone can be selected in
remains unchanged.
NAP mode.
• When the NAP alarm sounds, you can
press OFF to stop it.
• Press and hold NAP for 5 seconds or
select NAP time to 0 minutes to cancel
the NAP function.
Sleep Mode
In sleep mode, the radio and CD will turn
off automatically. To set the sleep time,
simply:
1. Press SLEEP, then the time display will
exhibit 0:59 and the radio will turn on
(default). While holding SLEEP, press
REV or FWD to set the sleep time. The
time range is from 1 minute to 2 hours
(default is 0:59).
2. Release SLEEP and the current time
5633 9330 (EN/E)
Note: Note: Note: Note: Note:
Power is fed to the unit even
when it is not functioning. To cut
the power supply off, the power cable
must be unplugged.
Power Failure Indicator
When AC power is interrupted (disconnected)
for a short period of time, both time and
alarm settings will change (unless battery is
installed). After AC power is restored
(reconnected), the Digital Display will blink to
indicate that power was interrupted and you
should readjust the time and alarm settings.
EN/E
It is important to read this instruction book prior to using your new product for the first time.
Es importante leer este manual antes de usar por vez primera su euipo.
Radio
TV Band Tuning the Stations Automatic Radio Station
CH 2-13 are available for TV Band. 1. Press RADIO ON/BAND (located on Search
1. Press RADIO ON / BAND to access TV the front of the radio) to turn on the
1. Press RADIO ON/BAND (located on the
radio.
Bands.
2. Press RADIO ON/BAND repeatedly to
2. Press REV or FWD to select among the TV
2. Press and hold REV or FWD for 2
select the desired broadcast band.
channels.
3. Press REV or FWD to tune to your
3. TV and the corresponding channel
desired radio station.
number will show on the display.
4. Press VOLUME + / - to adjust to your
Selecting the Preset Radio
desired listening level.
TV band: CH 2 - 59.75 MHz, CH 3 - 65.75
Stations
MHz, CH 4 - 71.75 MHz, CH 5 - 81.75 MHz, CH
Setting the Preset Radio
6 - 87.75 MHz, CH 7 - 179.75 MHz, CH 8 - 1. Press RADIO ON/BAND to turn on the
185.75 MHz, CH 9 - 191.75 MHz, CH 10 -
Stations
197.75 MHz, CH 11 - 203.75 MHz, CH 12 - 2. Press RECALL repeatedly to select your
1. Press RADIO ON/BAND to turn on the
209.75 MHz, CH 13 - 215.75 MHz
radio.
2. Press RADIO ON/BAND to change the
Antennas
Overwriting the Preset Radio
broadcast band.
FM antenna - The power cord acts as your FM Stations
3. Press REV or FWD to tune to your
antenna. It picks up moderate to strong radio desired radio station.
1. Press RADIO ON/BAND to turn on the
stations and eliminates the need for an
4. If you want to memorize this radio
external antenna in most strong signal areas.
station, press MEMO/SET once, and
2. Press REV or FWD to tune to your desired
Be sure the power cord is stretched to its full
then press RECALL repeatedly to
length. Do not coil or bunch the cord
choose the radio station number you
3. Press MEMO/SET once and then press
together. Changing position of the power
want to record in.
cord may improve reception.
5. Press MEMO/SET again to confirm.
6. If you set the radio station in the AL
4. Press MEMO/SET again to confirm.
AM Antenna - A built-in ferrite rod antenna
location, it will be the wake up radio
eliminates the need for an outside antenna
station of the alarm.
Deleting the Preset Radio
for AM reception. Rotating the unit slightly
may improve reception of distant AM Stations
stations.
1. Press RECALL repeatedly to select your
2. Press and hold MEMO/SET for 3 seconds
Limited Warranty (United
incorporated into other products.
• Products purchased or serviced outside the USA.
States)
• Acts of nature, such as but not limited to lightning
damage.
What your warranty covers:
Limitation of Warranty:
will be shown again, will show on the • Defects in materials or workmanship.
• THE WARRANTY STATED ABOVE IS THE ONLY
For how long after your purchase:
display, and the sleep time is set.
WARRANTY APPLICABLE TO THIS PRODUCT. ALL
• One year from date of purchase.
• Press SLEEP to read the remaining
OTHER WARRANTIES, EXPRESS OR IMPLIED
The warranty period for rental units begins with
sleep time.
(INCLUDING ALL IMPLIED WARRANTIES OF
the first rental or 45 days from date of shipment to
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
the rental firm, whichever comes first.
PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL
Sleep to Radio What we will do:
OR WRITTEN INFORMATION GIVEN BY THOMSON
• Provide you with a new, or at our option, a
1. Under sleep mode, press RADIO ON /
INC., ITS AGENTS OR EMPLOYEES SHALL CREATE A
refurbished unit. The exchange unit is under
BAND to turn on the radio. GUARANTY OR IN ANY WAY INCREASE THE SCOPE
warranty for the remainder of the original
OF THIS WARRANTY.
2. Sleep radio station will automatically
product's warranty period.
• REPAIR OR REPLACEMENT AS PROVIDED UNDER
switch to the current radio station, you • Proof of purchase in the form of a bill of sale or
THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE
receipted invoice which is evidence that the
may select the radio station as usual.
CONSUMER. THOMSON INC. SHALL NOT BE LIABLE
product is within the warranty period must be
3. Once the sleep time is reached, the radio
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
presented to obtain warranty service. For rental
will turn off automatically.
firms, proof of first rental is also required. RESULTING FROM THE USE OF THIS PRODUCT OR
You can reset to sleep to a different radio
ARISING OUT OF ANY BREACH OF ANY EXPRESS OR
How to make a warranty claim:
station, simply: IMPLIED WARRANTY ON THIS PRODUCT. THIS
• Properly pack your unit. Include any cables, etc.,
DISCLAIMER OF WARRANTIES AND LIMITED
1. Press RADIO ON/BAND. which were originally provided with the product.
WARRANTY ARE GOVERNED BY THE LAWS OF THE
We recommend using the original carton and
2. Press REV or FWD to tune to the radio
STATE OF INDIANA. EXCEPT TO THE EXTENT
packing materials.
station you want to sleep to.
PROHIBITED BY APPLICABLE LAW, ANY IMPLIED
• Include evidence of purchase date such as the bill
WARRANTY OF MERCHANTABILITY OR FITNESS FOR
of sale. Also print your name and address and a
A PARTICULAR PURPOSE ON THIS PRODUCT IS
Sleep to CD description of the defect. Send via standard UPS
LIMITED TO THE APPLICABLE WARRANTY PERIOD SET
or its equivalent to:
1. Under sleep mode, press to start CD
FORTH ABOVE.
Thomson Inc.
playback.
Product Exchange Center How state law relates to this warranty:
2. CD play mode will be automatically in
11721 B Alameda Avenue • Some states do not allow the exclusion nor limitation
Repeat All mode when using Sleep to CD
Socorro, Texas 79927 of incidental or consequential damages, or limitations
setting.
• Insure your shipment for of loss or damage. on how long an implied warranty lasts, so the above
3. The unit will turn off automatically once Thomson accepts no liability in case of damage or limitations or exclusions may not apply to you.
loss en route to Thomson.
the sleep time is reached. • This warranty gives you specific legal rights, and you
• Pay any charges billed to you by the Exchange
also may have other rights that vary from state to state.
Center for service not covered by the warranty.
If you purchased your product outside the USA:
• A new or refurbished unit will be shipped to you
This warranty does not apply. Contact your dealer for
Note:
freight prepaid.
warranty information.
• If you decide to turn off the unit sooner,
What your warranty does not cover:
press SNOOZE or OFF. • Customer instruction. (Your Owner's Manual
provides information regarding operating
• The unit will enter either CD or Radio
Instructions and user controls. For additional
mode after SLEEP is pressed, depending
information, ask your dealer.)
on the previous sleep setting.
• Installation and set-up service adjustments.
• When the sleep mode is activated again,
• Batteries.
the sleep time will be the same as the • Damage from misuse or neglect.
• Products which have been modified or
one you have set before.
u s e r
m a n u a l
RP5640
front of the radio) to turn on the radio.
seconds, it will automatically search a
radio station for you.
radio.
desired preset radio station.
radio.
preset radio station.
RECALL repeatedly to choose the radio
station number you want to overwrite.
preset radio station you want to delete.
to delete the selected preset radio
station.