Alesis Micron Service Manual page 21

Press all keys.
1) Verify that the first line of the LCD says "Press all keys".
2) When a key pressed, verify that the LCD says "Key ## down", where ## is
the key number. The leftmost key is number 0, and the rightmost key is
number 36.
3) When a key is released, verify that the LCD says "Key ## up", where ## is
the same key number.
4) As each key is pressed, make sure that the key movement and feel is
consistent with all the other keys. Inspect the keys as well for scratches and
dents.
5) When all 37 keys have been pressed, you will automatically go to the next
test.
Turn p wheel -->
1) Verify that the first line of the LCD says "Turn p wheel -->".
2) Turn the pitch wheel completely to the right.
Turn p wheel <--
1) Verify that the first line of the LCD says "Turn p wheel <--".
2) Turn the pitch wheel completely to the left.
Slide m1 -->
1) Verify that the first line of the LCD says "Slide m1 -->".
2) Slide the m1 slider completely to the right.
Slide m1 <--
1) Verify that the first line of the LCD says "Slide m1 <--".
2) Slide the m1 slider completely to the left.
Slide m2 -->
1) Verify that the first line of the LCD says "Slide m2 -->".
2) Slide the m2 slider completely to the right.
Slide m2 <--
1) Verify that the first line of the LCD says "Slide m2 <--".
2) Slide the m2 slider completely to the left.