Front Panel - Denon Professional DN-300CR User Manual

Hide thumbs Also See for DN-300CR:
Table of Contents

Advertisement

Features

Front Panel

4
2
1
1. Power: Press this switch to turn DN-300CR on or off. Make sure the power input is properly
connected to a power outlet. Do not turn the unit off during media recording or playback—doing
so could damage your media.
2. Headphones Jack: Connect headphones to this 1/4" (6.35 mm) TRS jack.
3. Headphone Level: Adjusts the volume level of the headphones.
4. Eject: Press this button to eject the CD in the Disc Slot.
5. Disc Slot: Insert a CD into this slot.
6. Input Volume L/R: Use these knobs to adjust the levels of the left and right analog audio inputs.
To adjust the levels individually, hold one knob and turn the other. Use the outer knob to adjust
the left stereo side, and the inner knob to adjust the right stereo side.
7. Display: This screen indicates the unit's current operation.
8. Remote Sensor: Point the remote control at this sensor when operating it.
9. Menu Button: Press this button to access Menu mode. When navigating the menus, press this
button to move back one level.
10. Display Button: Press this button to switch the time mode on the display.
11. Jog Wheel: Turn this dial to select tracks or to edit options shown in the Display. Press this dial
to confirm a selection.
12. Repeat: Press this button to turn the repeat playback function on and off.
13. Input Select: Press this button to select the input source for recording.
14. Finalize: Press this button to execute the finalize operation for a disc.
15. Erase: When using a CD-RW disc, press this button to erase a track or the entire disc.
16. Stop: Press this button to stop recording or playback.
17. Play: Press this button to start/resume recording or playback.
18. Pause: Press this button to pause recording or playback.
19. Record: Press this button to select record-ready mode. While recording, press this button to
manually increment track numbers.
20. Sync Rec: Press this button to set the Sync Record function on or off.
21. Fader: Press this button to apply a fade in or fade out during recording.
22. Timer: Switches the timer playback function on or off.
4
5
3
7
6
13 14 15 16 17 18 19 20 21 22
12
8
9
11
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents