Remote Control - Denon Professional DN-300CR User Manual

Remote Control

Cautions for use
• Remote control operations may not be possible if the remote control receiver is in direct
sunlight or under intense illumination.
• Please be aware that operating the remote control unit may cause unintended operations
to occur on other infrared-controlled equipment.
Installing the batteries
To install the batteries, open the cover on the back panel of the remote control and install two
batteries (AAA size) in the correct orientation as indicated by the "+" and "-" markings on the
case.
When to replace the batteries
If the range of control has lessened, or if pressing a button does not produce an operation,
please replace both batteries with new ones.
Caution regarding batteries
Incorrect use of batteries may cause leakage or bursting. Please carefully read and observe
the following cautions.
• Be sure to insert the batteries in the correct orientation as indicated by the "+" and "–"
markings on the battery case.
• Do not mix new batteries with old batteries, or batteries of differing types.
• Never attempt to recharge batteries.
• Remove the batteries if you won't be using the remote control unit for an extended period
(more than one month).
• If leakage occurs, carefully wipe off any liquid from inside the case and install new
batteries.
19