Download Print this page

Sharper Image 205471 Owner's Manual page 2

Heated physiotherapy massager

Advertisement

HOW TO OPERATE THE HEATED
PHYSIOTHERAPY MASSAGER
1. Place the comfort padding cover on the knee.
2. Put the massager on the top of the comfort
padding cover with the control panel
facing up.
3. Adjust the straps until it fits your knee
properly when buckled.
4. For best results, always attach the massager
to the curve of knee as close as possible.
5. Connect the AC power cable to the device
and plug the adapter into a wall outlet.
6. The LED light on control panel will turn
on, and the LED screen will show "--".
7. To turn on the Infrared Heat function, press
the Start/Stop button once on the control
panel. The Infrared Therapy will start working,
and the LED screen will show 40°C (the
default minimum temperature).
8. Press the UP or DOWN button on the
Control Panel to set your preferred
temperature (maximum of 65°C).
The thermostat-control system will
control the heat level automatically. It will
stop heating when it reaches your preset
temperature and restart heating when
its temperature is lower than your preset
temperature. (Note: the warming lights will
turn on and off during heating).
If you do not want heat therapy, you may
choose to have only infrared light therapy.
Press the DOWN button to reduce the
temperature to its minimum level, and this
device will work with only infrared
light therapy.
9. To turn off the Infrared Heat function, press
Start/Stop button once again on the control
panel. The LED screen will show "--".
10. Press the On/Off Switch turn on Vibration
Massage. (The On/Off Switch is located on
the left side, underneath the massager.)
NOTES
• The temperature increment between 40°C
and 55°C is 5°C. From 56°C to 65°C, the
temperature increment is 1°C.
• This device will be reset to 40°C for the
next use.
• The default time for infrared heat therapy
is 30 minutes. Press the Start/Stop
button on the control panel again if
you need more cycles.
• There is no default time for Vibration
Massage. You can turn Vibration Massage
on or off at any time.
• Infrared Light / Heat therapy and Vibration
Massage are independently controlled.
• For best results, use this device 2 to 3
times per day for 30 minutes each time.
SAFETY INSTRUCTIONS
Please read the following safety instructions
carefully before using this massager. If you
suffer from any of the medical conditions
listed below, consult with a doctor before
using this device.
We advise you to consult with your doctor
before using this device if you:
• Suffer from heart disease or a heart
condition.
• Have a sensory disorder or pacemaker
• Suffer from osteoporosis or diabetes
• Are prohibited from exercise by your doctor
• Are pregnant
• Have a malignant tumor or skin allergy
• Are undergoing medical treatment
• Are physically disabled
- 2 -

Advertisement

loading