Aeotec Range Extender 6 Manual

Aeotec by Aeon Labs Range Extender.
1
Aeotec Range Extender is a Z-Wave mesh
network repeater which can extend the range of
communication between Z-Wave products and
assist other devices to reach each other in your
Z-Wave network.
Range Extender 6
The Range Extender can also communicate securely
via AES 128 wireless Z-Wave commands and
supports Over-The-Air (OTA) firmware upgrades.
View the expanded manual:
http://aeotec.com/support
2 Familiarise yourself with your Range
Extender.
IMPORTANT!
This product has been fully tested and certified
to work with Z-Wave by the Z-Wave Alliance. It
is crafted using Z-Wave Plus, the latest device
version of Z-Wave. As such, if the product does
not work with your gateway, please be sure to
check with your gateway manufacturer that they
have integrated this device with their gateway for
full operation.
Quick start.
3 1. Decide on where you want your Range Extender
to be placed and then plug it into a wall outlet.
Adding your Range Extender into a Z-Wave
2. Set your Z-Wave Controller into pairing mode.
network.
3. Press the Z-Wave Button on your Range
Extender.
Getting your Range Extender up and running is as
4. If Range Extender has been successfully added
simple as plugging it into a wall outlet and adding
to your Z-Wave network, its RGB LED will be
it to your Z-Wave network. To set your Z-Wave
solid. If the adding was unsuccessful, the red LED
controller/gateway into pairing mode, please refer
will be on for 2 seconds and then remain colourful
to the respective section within your controller
gradient status, repeat the steps above.
instruction manual.
Removing your Range Extender from a
Z-Wave network.
Your Range Extender can be removed from your
Fixing hole
Z-Wave network at any time. You'll need to use
your Z-Wave network's main controller. To set your
Z-Wave Button
Z-Wave controller/gateway into removal mode,
please refer to the respective section within your
controller instruction manual.
Network LED
1. Set your Z-Wave Controller into device removal
mode.
2. Press the Z-Wave Button on your Range repeater the steps above.
Extender.
Resetting your Range Extender.
3. If Range Extender has been successfully removed
from your network, its RGB LED will remain
If at some stage, your primary controller is missing
colourful gradient status. If the removal was
or inoperable, you may wish to reset all of your
unsuccessful, the RGB LED will still be solid,
Range Extender's settings to their factory defaults.
repeat the steps above.
To do this, press and hold the Z-Wave Button
for 20 seconds and then release it. Your Range
Enabling Security Encryption.
Extender will now be reset to its original settings,
In order to take full advantage of all functionality and the green LED will be solid for 2 seconds
the Range Extender, you may want your Range
and then remain the colourful gradient status as a
Extender is a security device that uses secure/ confirmation.
encrypted message to communicate in your Z-Wave
4 Technical Specifications.
network, so a security enabled controller/gateway is
needed.
Model number: ZW117.
1. Set your Z-Wave security controller/gateway into
Operating temperature: 32°F to 104°F/0°C to 40°C.
pairing mode.
Relative humidity: 8% to 80%.
2. Press the Z-Wave Button 2 times within 1 second.
Operating distance: Up to 492 feet/150 meters
3. If the Range Extender has been successfully
outdoors.
added to your Z-Wave network, its blue LED will
be solid for 2 seconds and then be off. Otherwise,
AC input:
Version Input (Standby power)
Working band
AU
230V 50Hz, Max: 1.8W 921.42MHz
BR 220V 60Hz, Max: 1.8W 921.42MHz
CN
220V 50Hz, Max: 1.8W 868.40MHz
EU
230V 50Hz, Max: 1.8W 868.42MHz
UK India
IL 230V 50Hz, Max: 1.8W 916.02MHz
IN 230V 50Hz, Max: 1.8W 865.20MHz
UK 6 Warranty.
230V 50Hz, Max: 1.8W 868.42MHz
US
120V 60Hz, Max: 0.8W 908.42MHz
If you are in need of any technical support during or
subsequent to your products' warranty, please get in
Plug Specifications.
5
touch with our support team via http://aeotec.com/
support. The Company you bought this product
from has also guaranteed to assist you with any of
your support needs, and you can also contact them
for accordingly.
This guarantee made by the company who you
purchased the product from includes the transfer of
Aeon Labs' full warranty to that Company. They've
guaranteed that they'll be able to assist you, the
USA Europe Australia
China