Page 1
Siren Gen 5 user guide. Modified on: Tue, 28 Feb, 2017 at 2:45 AM Aeotec by Aeon Labs Siren Gen5. Aeotec Siren Gen5 has been crafted to power connected lighting using Z-Wave Plus . It is (http://aeotec.com/z-wave-plus) powered by Aeotec’s Gen5 technology.
Page 2
Getting your Siren up and running is as simple as plugging it into a wall socket and linking it to your existing Z-Wave network. The following instructions tell you how to link your Siren to your Z-Wave network via using Aeotec by Aeon Labs’...
Page 3
10/18/2017 Siren Gen 5 user guide. : Aeotec by Aeon Labs If you’re using a Minimote. 1. Decide on where you want your Siren to be placed and plug it in to a wall socket. Its Network LED will begin to blink.
Page 4
10/18/2017 Siren Gen 5 user guide. : Aeotec by Aeon Labs 1. If your Z-Stick is plugged into a gateway or a computer, unplug it. 2. Take your Z-Stick to your Siren. 3. Press the Action Button on your Z-Stick.
Page 5
10/18/2017 Siren Gen 5 user guide. : Aeotec by Aeon Labs Reset your Siren. This method is not fully advised unless your gateway has failed, and you do not yet have another gateway to perform a general unpair on Siren Gen5.
Need help?
Do you have a question about the Siren Gen 5 and is the answer not in the manual?
Questions and answers