Table of Contents
Advertisement
References
Trouble Checks
Trouble
Rewind does not operate
VCR makes noise when stopped
Will not auto channel search active
channels correctly
Cannot select channels over 69
Cassette with safety tab removed does not start to
play automatically
Here's what to try:
• Tape already rewound.
• VCR is removing tape from heads. This is normal. The head cylinder inside
the VCR will continue to rotate for a few minutes after you put the VCR in
the stop mode.
• Check antenna connections.
• Check Signal Type: CABLE/ANTENNA feature. See page 8.
• Cable channels over 69 can only be selected if Signal Type: CABLE/ANTENNA
feature is set to CABLE. Details are on page 8.
• Set Auto Play ON/OFF feature to ON. Details are on page 12.
25
Advertisement
Table of Contents
