CONTENTS IMPORTANT SAFETY INSTRUCTIONS ...................3 PERSONAL PRECAUTIONS......................3 PREPARATIONS BEFORE USAGE....................4 THE STEPS TO CONNECT A BATTERY...................4 FEATURES............................5 CHARGING METHODS........................5 VEHICLE STARTING OPERATION INSTRUCTIONS................6 DC POWER SUPPLY METHOD.......................7 USING THE USB PORT........................8 FLASH LIGHT USING METHODS....................8 DISPLAY MESSAGES........................9 MAINTENANCE INSTRUCTIONS....................10 STORAGE INSTRUCTIONS......................10 SPECIFICATIONS.........................11 This manual will explain how to use the unit safely and effectively.
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS WARNING – RISK OF EXPLOSIVE GASES WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL OPERATION. IT IS IMPORTANT THAT YOU FOLLOW THESE INSTRUCTIONS EACH TIME YOU USE THE UNIT. To reduce the risk of battery explosion, follow these instructions and those published by the battery manufacturer and the manufacturer of any equipment you intend to use in the vicinity of a battery.
2.8 Wear complete eye and body protection, least 10 minutes and get medical attention including safety goggles and protective right away. clothing. Avoid touching your eyes while 2.10 If battery acid is accidentally swallowed, working near the battery. drink milk, the whites of eggs or water. DO 2.9 If battery acid contacts your skin or clothing, NOT induce vomiting.
FEATURES No. Description No. Description No. Description Light button Temperature alarm indicator Mini jump starter Jump start button Charger input port Jump starter power clamp 12 V / USB button USB port DC port connector Jump start function indicator 12 V / 10 A DC output port AC wall charger Battery indicator Jump Starter output port...
6.5 CHARGE THE INTERNAL BATTERY USING THE THIRD STEP: Insert the other end of the DC DC CARCHARGER charger to into the vehicle’s accessory outlet (lighter socket). The battery indicator 5 will While driving, you may also use the 12 V DC be on with a flash.
WARNING! THIS OVERRIDES A SAFETY 7.2.1 PREPARATIONS BEFORE STARTING FEATURE. It will energize the clamps and 1. Turn off the vehicle ignition switch and the cause sparking if they are touched together. power equipment. If the clamp connections are reversed, 2.
USING THE USB PORT IMPORTANT INDICATOR! THE FUNCTION IS unplug the device. If the battery indicator 5 USED FOR MOST DC ACCESSORIES THAT is still on, please press to turn off the ARE EQUIPPED WITH A 5 V ACCESSORY USB function. PLUG.
DISPLAY MESSAGES Item Display content Equipment Status Battery indicator 5 flicker at the end Battery voltage is low Battery indicator 5 flicker, alarm indicator 6 turn red and light flicker (Start Jump Start, find the battery Battery voltage is high voltage high, Jump Start function indicator 4 turn red) Temperature alarm 7 turn red and flicker Battery temperature is high...
MAINTENANCE INSTRUCTIONS 12.1 After use and before performing 12.3 Do not open the unit, as there are no maintenance, unplug and disconnect the user-serviceable parts; any servicing should unit. be performed by qualified service personnel. 12.2 Use a dry cloth to wipe all battery corrosion and other dirt or oil from the battery clamps, cords, and the outer case.
SPECIFICATIONS Weight 1.1 kg Product Dim 233 x 104 x 53 mm Ternary Lithium Battery 18000 mAh (67 Wh) Battery Cycle Life 500 Times(80% DOD) Instant Amp 500 A for 20 Milliseconds Cranking Amp 300 A (on 5 Seconds than need to stop 1 Minute) Using Cycles 18 times Charger Spec...
Page 12
KRAF TWERK Europe AG KRAFTWERK Sàrl. Mettl enbachstrasse 23 25, rue du Stade CH- 8617 Mönchaltorf F – 67870 Bischoffsheim Switzerland France Tel. +33-388 48 64 50 Tel. +41-44 949 40 50 www.KRAFTWERKtools.com...
Need help?
Do you have a question about the 31318 and is the answer not in the manual?
Questions and answers