CEL-FI G32-2X Quick Start Manual

Basic Functionality
The Cel-Fi GO X connects to an external Donor Antenna to draw in
a cellular signal from the macro network. The Cel-Fi GO X Smart
Signal Booster finds the appropriate cellular signal, per the product's
configuration, improves the signal, and amplifies it. Improved service
is provided to the user via the Server Antenna.
Note: A Mobile version ("GO M") of the product is available. Go to
cel‑fi.com for details.
Cel-Fi WAVE Mobile App
The Cel-Fi WAVE app provides a User Interface to Cel-Fi systems.
The app's dashboard shows the system "Boost" value. A numeric
representation mapped to the amount of Signal Gain the system is
providing. Higher is better, with nine (9) being the highest value.
Cel-Fi WAVE and Cel-Fi GO X
Your Cel-Fi GO X will automatically select the strongest cellular
signal to boost. However, you may manually configure the system
preferences using Cel-Fi WAVE. Connect to Cel-Fi GO X with a
bluetooth enabled mobile device, and manage the boost settings.
NEMA 4 Rating
The Cel-Fi GO X is NEMA 4 rated, and can be used both indoors and
outdoors.
The NEMA 4 rating provides the following advantages:
• A degree of protection against ingress of solid foreign objects
(falling dirt and windblown dust)
• A degree of protection from the ingress of water (rain, sleet,
snow, splashing water, and hose directed water)
• Equipment will be undamaged by the external formation of ice
on the enclosure
Cel-Fi GO M Smart Signal Booster

User Interface

Cel-Fi GO X features an LED on the top face to indicate the
unit's state:
LED MEANING
Solid GREEN The unit is working properly and boosting properly.
Blinking GREEN Unit is scanning for networks to boost.
Blinking RED The unit is in an error condition. Use the Cel-Fi WAVE app to
check the error code meaning and remedy.
Solid RED The unit has a hardware error and is not booting up normally.

Troubleshooting

ISSUE MEANING
Continual Blinking Unit is operational, • Make sure both antennas are connected
GREEN but not attaching to a properly and are appropriate for the
network to boost. desired frequencies to boost.
• Make sure the selected operator to
relay is available at your location. This
can be checked with the Cel-Fi WAVE
application. If the service is not available,
it cannot be boosted.
Solid RED LED Unit is not • Unplug and reinsert power.
operational. • If restart has no effect, contact vendor for
remedy.
Antenna Kitting
The following antennas are authorized to be used with Cel-Fi GO X
Smart Signal Booster:
MODEL DESCRIPTION
Wideband Panel Antenna
CERTIFICATION
FCC, CE
DONOR
A32-V32-100
3
MODEL DESCRIPTION
Wideband
Directional Antenna
CERTIFICATION
FCC, CE
DONOR
A32-V24-100
3
MODEL DESCRIPTION
Whip Antenna
CERTIFICATION
FCC, CE
DONOR
A21-V33-100
3
MODEL DESCRIPTION
Indoor Omni Antenna
CERTIFICATION
FCC, CE
DONOR
A11-V43-100
Additional Cel-Fi Antenna options are available at www.cel-fi.com/antennas
ACTION
Cel-Fi GO X is optimized for stationary
FREQUENCY
698-960 // 1710-2700 MHz
applications such as buildings, factories,
BAND SUPPORT
1/3/5/7/8/20/2/4/5/12/13/28 warehouses, and similar. It features 100dB
SERVER
of system gain and provides the largest
3
FREQUENCY
cellular coverage footprint in its category.
698-960 // 1710-2700 MHz
BAND SUPPORT
1/3/5/7/8/20/2/4/5/12/13/28
SERVER
3
FREQUENCY
698-960 // 1710-2700 MHz
BAND SUPPORT
1/3/5/7/8/20/2/4/5/12/13/28
SERVER
3
FREQUENCY
698-960 // 1710-2700 MHz
BAND SUPPORT
1/3/5/7/8/20/2/4/5/12/13/28
SERVER * Other variations of the product package may include
additional internal and external antennas or components.
3
qsg_GO-X-Eng_17-0309
Cel-Fi GO X

Quick Start Guide

Smart Signal Booster
™
IN THE BOX
Main Unit Power Supply
www.cel-fi.com