Audio/Video In Jacks - RCA Pro884HB User Manual

Playback on TV or VCR Using AUDIO/VIDEO IN Jacks
To connect your camcorder to a TV or VCR using AUDIO/VIDEO IN jacks, use the
audio/video cable that was packed with the camcorder. If your TV is already
connected to a VCR, you can attach the camcorder to the VCR and watch what the
camcorder is recording or playing on the TV.
Back of
Stereo VCR
or TV/Monitor
1
L
AUDIO
IN
R
VIDEO
IN
Yellow
Video Plug
S-VIDEO
IN
OR
Y/C IN
S-Connector
or
Back of
Y-Adapter
Mono VCR
(Such as AH25)
or TV/Monitor
AUDIO
IN
VIDEO
IN
Installation
1 Attach the output cable's white plug
to the L AUDIO IN jack and the red
plug to the R AUDIO IN jack of the
TV (or VCR).
Note: If your VCR only has one
AUDIO IN jack, you may need a
Y-adapter.
2 Attach the yellow video plug on the
audio/video cable to the VIDEO IN
jack on the TV or VCR.
56
White and
Red Audio Plugs
2
Audio/Video
Output Cable
3 (Supplied)
1 White and Red
Audio Plugs
2
Yellow Video Plug
3 Optional: If your TV has an
4 Attach the plug on the end of the
4
Audio/Video
Connector
(Behind Small
Cover)
4
Audio/Video
Output Cable
(Supplied)
S-Connector
(No Connection)
S-VIDEO IN connector, connect the
S-Connector on the output cable.
audio/video cable to the audio/video
connector located behind the small
cover on the camcorder. Match the
tabs on the plug with the notches on
the camcorder connector. Do not
force the plug.