Download Print this page

HANDONG HYDRO H2 365 Product Manual page 5

Water generator

Advertisement

Cleansing
In operation, when the LED flasher on switch part is changed from blue to pink, please
clean the electrode as the cleaning methode.
Clean the bottle, lid and ceramic ball case after separating them from each other.
You can cleanse the bottle with a neutral detergent by using soft sponge or cotton.
For the electrode cleansing, put 2–3 drops of vinegar after assembling the bottle.
After a while, cleanse it.
Do not directly clean the electrode by directly using detergent and scrubbing brush on it.
When you use the product for too long, the mineral in water can be accumulated
on the electrode, resulting in a smaller amount of hydrogen bubbles.
In this case, put 25ml of vinegar (1/2 of soju glass) in an assembled bottle.
Operate it for 2–3 times and clean it completely. (Be careful not to have the vinegar
directly come in close contact with the body since it is acid.)
Caution
These guidelines are given to secure safety and prevent any loss.
Please read them carefully before using the product.
Do not completely dry electrodes. Keep the electrode is always wet.
When not in use for a long time, clean water in sufficient quantity put on the electrode.
The charge voltage for the charger is 5V. Please use the exclusive adaptor.
Using a voltage over 5V can cause malfunction.
You should use spring water or purified drinking water.
You should not use other beverages including carbonate water or juice.
After the hydrogen has been generated,
the LED
will be turned on for a second depending on the battery capacity. When the
red LED
is turned on after the hydrogen generation, you should charge the battery.
Green
LED: Enough battery capacity
Red
LED: Need to charge battery
Red LED
turned off: Charge the battery right away
(When there is not enough battery, there will be a buzzer sound for three times.)
Do not wash or soak the hydrogen generator in the water.
When the hydrogen generator is soaked in the water,
remove the water completely before use.
Do not use hot water since it may cause burns.
●Do not disassemble, repair or rebuild the product.
When there is smell or smoke from the product,
turn it off right away and make inquiry to the customer service center.
H
365
Product manual
2
5

Advertisement

loading