Tecnoalarm TP8-64 User Manual
  1. Manuals
  2. Brands
  3. Tecnoalarm Manuals
  4. Security System
  5. TP8-64
  6. User manual

Tecnoalarm TP8-64 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

TP8-64
TP8-64
TP8-64
TP8-64
TP8-64
TP8-64 MET
TP8-64 MET
TP8-64 MET
TP8-64 MET
TP8-64 MET
8 - 64 ZONES
CONTROL PANEL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
Release:
Update:
Language:
FW version:
3.0
June 2009
English
2.3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TP8-64 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Tecnoalarm TP8-64

Summary of Contents for Tecnoalarm TP8-64

  • Page 1 TP8-64 TP8-64 TP8-64 TP8-64 TP8-64 TP8-64 MET TP8-64 MET TP8-64 MET TP8-64 MET TP8-64 MET 8 - 64 ZONES CONTROL PANEL USER MANUAL USER MANUAL USER MANUAL USER MANUAL USER MANUAL Release: Update: June 2009 Language: English FW version:...
  • Page 2 The features of the control panel can be subject to change without notice. Unauthorized reproduction or distribution of this manual, or any portion of it, on any device and in any form, is prohibited. The contents of this manual may be subject to change without notice. User Manual - TP8-64...
  • Page 3 CONFORMITY Hereby, Tecnoalarm srl declares that the present equipment is in compliance with the essential requirements and other relevant provisions of the R&TTE 1999/05/EC directive. The declaration of conformity is available on the website: www.tecnoalarm.com. TP8-64 - User Manual...
  • Page 4 User Manual - TP8-64...

  • Page 5: Table Of Contents

    3.6.2 PABX switchboard 3.6.3 Channels (A...H) 3.6.4 Call back 3.6.5 Mobile phone PROGRAMMING OF THE CODES 3.7.1 Master code 3.7.2 Standard user codes PROGRAMMING OF THE KEYS 3-10 3.8.1 Access periods 3-10 3.8.2 Programs 3-10 TP8-64 - User Manual Index...
  • Page 6 Reset of LED signaling with master code 4-14 4.7.2 Reset of LED signaling with installer code (tamper LED signaling) 4-14 QUICK COMMANDS - OPERATIONS WITHOUT CODE RELEASE OF PANIC ALARM 4-15 VIEWING OF ZONE STATUS 4-15 4.10 VIEWING ALARM MEMORY 4-15 Index User Manual - TP8-64...
  • Page 7 5.5.4 Learning 5-14 CONTROL BY TELEPHONE CALL FOR SYSTEM STATUS CHECK 6.1.1 System status check 6.1.2 Arming/disarming 6.1.3 Remote activation/deactivation of devices 6.1.4 Remote digital verification RDV 6.1.5 Opening message RECEPTION OF AN ALARM CALL TP8-64 - User Manual Index...

  • Page 8: Index User Manual -

    Index User Manual - TP8-64...
  • Page 9 IMPORTANT NOTES The system TP8-64 is very easy to use. Thus, we recommend to arm the system every time you leave your rooms unattended, even if for short periods of time. For your own safety keep all the codes secret.
  • Page 10 Notes User Manual - TP8-64...

  • Page 11: Codes

    1. GENERAL FEATURES The control panel TP8-64 is a new generation microprocessor-based control panel. It controls a minimum of 8 and a maximum of 64 zones, which can be freely associated to the inputs of the CPU board, the plug-in expansion module, the input modules connected via serial line and the plug-in radio expansion.

  • Page 12: Standard User Menu

    Call again after 6 but no later than 60 seconds from the first call. If the control panel receives the second call within 6 to 60 seconds from the first one, that has been interrupted after the first ring, it answers immediately. General Features User Manual - TP8-64...

  • Page 13: Programs

    (entrance) on their own. The common zone is enabled only if both programs it belongs to are armed contemporaneously. COMPOSITION OF THE CONTROL PANEL TP8-64 TP8-64 - User Manual General Features...
  • Page 14 Do not open the control panel casing. Unauthorized opening of the casing causes a tamper alarm with activation of the sirens. The electronic components may be under high voltage. For maintenance, consult a qualified installe. General Features User Manual - TP8-64...

  • Page 15: Led Signaling Of The Consoles

    2. SIGNALING LED SIGNALING OF THE CONSOLES The TP8-64 control panel controls up to 15 consoles: Console with liquid crystal display (LCD) LCD200 Console with liquid crystal display (LCD) and speaker LCD300/S, design by The console provides coloured LED for signaling of the alarms and system status.
  • Page 16 M a in s p o w e r (2 3 0 V A C ) o k S C R EW S S C R EW P R O T EC T I O N L I D Signaling User Manual - TP8-64...

  • Page 17: Alarm Led - Red

    Signaling on display TAMPER In addition to LED signaling, tamper alarms are signalled on the display of the console Keypoint 1 by a message indicating the kind of violation. TP8-64 - User Manual Signaling...
  • Page 18 An unknown key has been inserted in one of the key reader connected. False code 32 or more keys have been pressed on one of the consoles and keypads connected without entering a valid code. GSM fault Communication with GSM telephone communicator lost, SIM card missing. Signaling User Manual - TP8-64...

  • Page 19: Control Led - Yellow

    = the serial line is disturbed or badly connected. CONSOLE STATUS LED CM The console status LED CM signals the status of the console: LED on = keystroke LED off = the serial line is disturbed or badly connected. TP8-64 - User Manual Signaling...

  • Page 20: Led Signaling Of The Tp Sdn Electronic Keypad

    The battery voltage has fallen to a value below the minimum guaranteeing correct functioning of the control panel (<11V) or voltage of the battery of one of the radio devices connected is insufficient (<2.7V). Power failure (230V AC) Signaling User Manual - TP8-64...

  • Page 21: Keypad Status Led - Green

    = the program is armed LED off = the program is in stand-by Arming and disarming as well as the activation and deactivation of by-pass are logged in the event buffer of the control panel. TP8-64 - User Manual Signaling...

  • Page 22: Led Signaling Of The Tp Sk6N Key Reader With Mini Keypad

    The battery voltage has fallen to a value below the minimum guaranteeing correct functioning of the control panel (<11V) or voltage of the battery of one of the radio devices connected is insufficient (<2.7V) Power failure (230V AC) Signaling User Manual - TP8-64...

  • Page 23: Program Status Led - Yellow

    LED off = no key has been inserted LED blinking = a key has been inserted into another keypoint or, if contemporaneously the red general alarm LED is lit, an unknown key has been inserted TP8-64 - User Manual Signaling...

  • Page 24: Led Signaling Of The Atpk Key Reader

    The battery voltage has fallen to a value below the minimum guaranteeing correct functioning of the control panel (<11V) or voltage of the battery of one of the radio devices connected is insufficient (<2.7V). Power failure (230V AC) Signaling User Manual - TP8-64 2-10...

  • Page 25: Reset Of Alarm Memory Signaling

    WARNING The active alarms are not stopped upon reset of alarm memory signaling. LED signaling for tamper and general alarm (e.g. low battery, power failure) cannot be reset by the user. Consult the installer. TP8-64 - User Manual Signaling 2-11...
  • Page 26 Signaling User Manual - TP8-64 2-12...
  • Page 27 3. PROGRAMMING (MASTER CODE REQUIRED) The Master (usually the owner of the system) can program a series of settings through the LCD console. WARNING If a console is in use, the other consoles connected are inhibited. TP8-64 - User Manual Programming...
  • Page 28 On the display is viewed "Access - Master". Master Select the keypad On the display is viewed the first programming menu. Menu Commands available Remote ctrl to access to the programming menu to select the menu + EXIT to confirm and quit Programming User Manual - TP8-64...

  • Page 29: Activation/Deactivation Remote Controls

    If they belong to more programs and they are programmed common zone, they are enabled only if all the programs they are included in are. Select the Programs menu and confirm by clicking on the key. Menu to select the program 1...8 Programs to confirm TP8-64 - User Manual Programming...

  • Page 30: Timers

    Monday every Thursday every day every holiday every Tuesday every Friday every working day every Sunday every Wednesday every Saturday Commands available to select the frequency to confirm + EXIT to confirm and quit Programming User Manual - TP8-64...

  • Page 31: Access Periods

    HOUR OF BEGINNING AND END Program the starting/ending time of the access period selected. Commands available to select the field to be modified to enter the values requested + EXIT to confirm and quit TP8-64 - User Manual Programming...

  • Page 32: Programming Of The Telephone Parameters

    PABX number to be dialed in order to switch to the outgoing line (1...16 digits). Commands available to cancel an existing number to enter the PABX number to add DTMF symbols to the number PABX + EXIT to confirm and quit Programming User Manual - TP8-64...

  • Page 33: Channels (A...h)

    Commands available Emergency no. to cancel an existing number 01155667788 to enter the value requested to add DTMF symbols to the number + MEM to add pauses to the number + EXIT to confirm and quit TP8-64 - User Manual Programming...

  • Page 34: Programming Of The Codes

    Disables both the voluntary exclusion of zones and the automatic exclusion of open zones. If the control panel is armed in the presence of open zones, these will release an alarm at the end of the arming phase. Programming User Manual - TP8-64...

  • Page 35: Standard User Codes

    12345, the hold-up code is 12344. If the user code ends in 0 (e.g. 12340), the hold-up code ends in 9 (e.g. 12349). Thanks to this function, the user can release a silent alarm under duress simulating disarming. TP8-64 - User Manual Programming...

  • Page 36: Programming Of The Keys

    + EXIT to confirm and quit Viewing of the current settings key not enabled for the program Programs [ # ] key enabled for the program Program 01 [ # ] Programming User Manual - TP8-64 3-10...

  • Page 37: Attributes

    Options available Periods WL keys Ass. buttons Ass. buttons Attributes Learning WL keys Attributes 3.9.1 PERIODS Defines the access period (from 1 to 8) during which the wireless key is enabled. WL keys Learning TP8-64 - User Manual Programming 3-11...

  • Page 38: Association Buttons

    1 for at least 10 seconds to initiate the process. During this period of time, the device transmits its ID code to the control panel. Learn. After learning, on the display is viewed Learn. Completed. Completed Programming User Manual - TP8-64 3-12...

  • Page 39: Programming Of The Consoles

    Viewing of the current settings Zone zone enabled Ctrl panel Z4 [ # ] [ # ] zone disabled (excluded) The procedure of exclusion is the same for all the other devices. TP8-64 - User Manual Programming 3-13...

  • Page 40: Test

    3.12.6 VIEWING OF THE LED STATUS On initiation, all the LED on the console are lit and the buzzer is activated. LED console Commands available + EXIT to quit the submenu Programming User Manual - TP8-64 3-14...

  • Page 41: Gsm Module Test

    Select the menu Option. Menu to confirm Options Enables the installer to accede to the control panel via telephone line using the TECNOALARM programming and monitoring software. Commands available to disable remote access to enable remote access + EXIT to confirm and quit...
  • Page 42 Programming User Manual - TP8-64 3-16...
  • Page 43 1 master code (default code 12345) The master code is usually reserved for the owner of the system and gives access to the master programming menu as well as the standard arming/disarming and parset functions. TP8-64 - User Manual Control by console...
  • Page 44 62 standard user codes (default code 00000) Every code can be enabled individually for arming/disarming or by-pass of determined programs. Control by console User Manual - TP8-64...
  • Page 45 OPERATIONS WITHOUT CODE TP8-64 - User Manual Control by console...

  • Page 46: Arming

    If you arm a program containing open zones or zones in alarm, the alarm will be released and the devices programmed (sirens or logic outputs) activated. Ensure that all the zone contacts are closed (or in stand-by) or exclude the open zones by the procedure explained lateron. Control by console User Manual - TP8-64...
  • Page 47 LCD200 CONSOLE LCD300/S CONSOLE TP8-64 - User Manual Control by console...

  • Page 48: Arming With Master Code

    Exclude the zone selected pressing: Zone xxx + #YES to exclude the zone selected Select another zone to be excluded with the keys arrow up and arrow down or exclude sequential zones pressing repeatedly # (hash). Control by console User Manual - TP8-64...

  • Page 49: Arming With Standard User Code

    It is not permitted in case of trouble/general alarm or fault (low battery, power failure etc.). At the attempt at doing so, on the display is viewed ! ARM. DENIED ! followed by the kind of alarm. TP8-64 - User Manual Control by console...

  • Page 50: Arming Through Key Zone

    Outside the access periods associated the codes are not accepted by the control panel and any attempt at acceding to the system will have no effect. When trying to do so, on the display is viewed ACCESS ! DENIED !. Control by console User Manual - TP8-64...

  • Page 51: Arming Denied

    On every keystroke the counter is reset. Select the programs to be disarmed, e.g.: + 12 Procede as for disarming with master code (see § 4.2.1). 4.2.2.1 TOTAL DISARMING See § 4.2.1.1. TP8-64 - User Manual Control by console...

  • Page 52: Disarming Under Duress (If Enabled)

    + 66778 Act. by-pass + 12 Program 1 On the display is viewed Act. by-pass followed by the program partset. For the time the by-pass is active the corresponding program LED is blinking. Control by console User Manual - TP8-64 4-10...

  • Page 53: Automatic By-Pass Activation

    Deact. by-pass by-pass time and the yellow program LED on the console become lit. According to programming, the buzzers of the consoles are activated, too. TP8-64 - User Manual Control by console 4-11...

  • Page 54: Activation/Deactivation Remote Controls

    The blocking command stops all the active alarm calls cycles as well as those waiting. The block of the telephone calls is not permitted in case of hold-up alarm. In this case, the cycle continues uninterrupted. Control by console User Manual - TP8-64 4-12...

  • Page 55: Viewing Of The Event Buffer

    A n s w e r w it h o u t c o n firm a t io n - n o e ve n t c o n firm e d - G S M WARNING The events cannot be deleted from the event buffer. TP8-64 - User Manual Control by console 4-13...

  • Page 56: Reset Of Led Signaling

    The active alarms are not stopped upon reset of alarm memory signaling. LED signaling for tamper and general alarm (e.g. low battery, power failure) cannot be reset by the user. Consult the installer. Control by console User Manual - TP8-64 4-14...

  • Page 57: Release Of Panic Alarm

    Viewing of alarm of a specific program To view the stored alarms of a specific alarm, preced the MEM key with the program Viewing number, e.g.: Program 1 + 1 MEM TP8-64 - User Manual Control by console 4-15...
  • Page 58 Control by console User Manual - TP8-64 4-16...

  • Page 59: Control By Tp Sk6N Key Reader With Mini Keypad

    The common zone (entrance), however, is activated only if the programs of both appartments it is included in are armed simultaneously. TP8-64 - User Manual Control by keypoint...
  • Page 60 If the programs selected contain delayed zones, on expiry of the zone exclusion time follows the exit time and the programs in question are only armed on expiry of the exit time. Control by keypoint User Manual - TP8-64...

  • Page 61: Disarming

    It is possible to define up to 8 access periods of the electronic keys. As a consequence, the electronic keys are enabled for by-pass during the access periods associated by the installer or the holder of the master code only. TP8-64 - User Manual Control by keypoint...

  • Page 62: Release Of Panic Alarm

    The common zone (entrance), however, is activated only if the programs of both appartments it is included in are armed simultaneously. Control by keypoint User Manual - TP8-64...
  • Page 63 WARNING On arming of a program in presence of open zones, the alarm devices programmed (sirens/logic outputs/telephone channels) are activated unless the open zones are exluded with a procedure explained lateron. TP8-64 - User Manual Control by keypoint...

  • Page 64: Disarming

    SINGLE ARMING Introduce an electronic key enabled for the program armed into the key reader. The program is disarmed and the corresponding led is switched off. Remove the key from the key reader. Control by keypoint User Manual - TP8-64...

  • Page 65: By-Pass

    Introduce an electronic key enabled for by-pass into the key reader. The LED corresponding to the programs partset start blinking quickly signaling that the arming phase is active. After the arming phase, the LED become lit. Remove the key from the key reader. TP8-64 - User Manual Control by keypoint...

  • Page 66: Special Operating Conditions

    If a trouble/general alarm is active (the corresponding LED is blinking), arming of the control panel by key is not permitted unless the key has been enabled for the by-pass of the general alarms. Control by keypoint User Manual - TP8-64...

  • Page 67: Control By Tp Sdn Electronic Keypad

    Open zones/active zone alarms are not signalled unless you try to arm the control panel. In the arming phase the yellow LED 7 OCG signals zone status: LED blinking = open zones LED off = zones ok TP8-64 - User Manual Control by keypoint...
  • Page 68 It is possible to define up to 8 access periods of the codes. As a consequence, the codes are enabled for arming and disarming during the access periods associated by the installer or the holder of the master code only. Control by keypoint User Manual - TP8-64 5-10...

  • Page 69: Disarming

    It is possible to define up to 8 access periods of the codes. As a consequence, the codes are enabled for by-pass during the access periods associated by the installer or holder of the master code only. TP8-64 - User Manual Control by keypoint 5-11...

  • Page 70: Special Operating Conditions

    If a general alarm is active (the corresponding LED is blinking), arming of the control panel is not permitted with code unless the code is enabled for the by-pass of the general alarms. Control by keypoint User Manual - TP8-64 5-12...

  • Page 71: Tx240-3 Wireless Key

    On the console the LED corresponding to the programs previously armed by this wireless key are switched off. The buzzer of the console is activated for approx. 2 seconds The programs previously armed by this wireless key, are disarmed. TP8-64 - User Manual Control by keypoint 5-13...

  • Page 72: By-Pass

    To activate by-pass, simply press the corresponding function key. 5.5.4 LEARNING The wireless key must be recognized from the control panel before use. The name of this function is learning (see § 3.9.4). Control by keypoint User Manual - TP8-64 5-14...

  • Page 73: Call For System Status Check

    The control panel plays the messages corresponding to the status of the program (armed or in stand-by) and possible alarms logged in the buffer (alarm memory). Arming/disarming To arm or disarm the programs, press * (star) followed by the number of the program: program 1 program 8 TP8-64 - User Manual Control by telephone...

  • Page 74: Remote Activation/Deactivation Of Devices

    The duration of the opening message is fixed. Thus, it is recommended to record messages with a duration similar to 10 seconds. WARNING Recording of the opening message requires the master code. To record the opening message, press: The control panel emits 2 beeps and initiates recording immediately after the 2 beeps. Control by telephone User Manual - TP8-64...

  • Page 75: Opening Message

    Remote digital verification of the active RDV detectors (belonging to the program in alarm) for approximately 20s After the verification of the alarms, or after the alarm messages, if there are no RDV detectors connected to the control panel, the communication is shut down. TP8-64 - User Manual Control by telephone...
  • Page 76 TP8-64 TP8-64 TP8-64 TP8-64 TP8-64 USER MANUEL USER MANUEL USER MANUEL USER MANUEL USER MANUEL Control by telephone User Manual - TP8-64...

This manual is also suitable for:

Tp8-64 met

Table of Contents

Save PDF