Piston Connecting Rod - Exmark 127-9041 Service Manual

Disassembly / Reassembly

Piston connecting rod

Assembly:
. Put the piston ring sign facing up when assembling.
. Don't wrongly assemble the top ring and the second
ring.
. After assembling, be sure the piston can freely
move.
. Stagger the open of the piston to piston pin hole
with 120 degree.
Check, refer to
Piston pin
Piston ring clip
Assembly: Put the one end into the
piston slot, clamp other end by
sharp nose pliers and revolve into
slot. Don't let the open of clip
aiming at the piston pin slot..
Top ring
The second ring
Oil ring
Connecting rod
Assembly: Put the long end of the
CLIP
connecting rod aiming at the triangular
mark when assembling.
CUT-OUT
4－19
Maintenance
Sign
Top ring
The second ring
Oil ring
Piston