Important Safety Precautions - Kodak 24HDX100S User Manual

IMPORTANT SAFETY PRECAUTIONS

— Read & keep this instruction manual.
— Read all warnings.
— Clean only with dry cloth.
— Do not block any ventilation openings. Install in accordance with the manufacturer's
instrutions.
— Do not install near any heat source such as radiators, heat registers, stoves or other apparatus
(including amplifiers) that produce heat.
— Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong.
— The wide blade or third prong are provided for your safety. If the provided plug does not
fit into your outlet, protect the power cord from being walked on or pinched particularly
at plugs, socket outlets and the point where they exit from the apparatus.
— Only use attachments / accessories specified by the manufacturer.
— Use only with the bracket or table stand specified by the manufacturer or sold with the
apparatus.
— Unplug this apparatus during lightning storms or when unused for long period of time.
— To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
— The apparatus should be disconnected from the mains by placing the power / standby
switch in the standby position and unplugging the power cord of the appataus from the AC
main outlet.
— The socket outlet should be installed near the equipment & should be easily accessible.
— This product should never be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacture's instructions have been adhered to.
— The apparatus should not be exposed to dripping or splashing & objects filled with liquid,
such as vases, should be placed on the apparatus.
— Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted
candles).
— Wall or ceiling mounting - The appliance should be mounted to a wall or ceiling only as
recommended by the manufacturer.
Servicing should be carried out by qualified service personnel only. To reduce the risk of
electric shock do not perform any servicing other than that contained in the operating
instructions.
3