Table of Contents
Advertisement
8 January 2009
Installation
Make sure that your vehicle is in the key off/engine off
position before you plug in the Ultra X-Tuner.
Connect the communications cable that came with the
downloader into the top of the Ultra X-Tuner and the
other end into the OBD II port (see diagram above).
The OBD II port is the diagnostic port located
underneath the dash on the driver's side of the
vehicle.
Main Menu Screen
The downloader will boot up with a BD logo and proceed to the main menu. From here
you can decide which option you would like to select:
TUNER
SETUP
firmware/database info numbers for the tuner,
changes contrast & backlight options.
TUNING – Select this option to download a power
program, to adjust transmission shifting or to
return the program to stock.
ADVANCED FEATURES – Select this option to view and erase diagnostic trouble codes
as well as advanced features such as data logging.
The layout of the main menu is as follows:
Tuner Setup
o About
o Set Screen Contrast
o Set Screen Backlight
Tuning
o Read Vehicle
o Change Settings
o View Settings
o Program Vehicle
Advanced Features
o Diagnostic Codes (Read/Clear DTC's)
o Data Logging
Ship: #88 – 446 Harrison St, Sumas, WA 98295
BD Duramax 6.6L X-Tuner # 1054861/1054862
–
Displays
BD Engine Brake Inc
A10 – 33733 King Rd, Abbotsford, BC, Canada V2S 7M9
Ph: 604.853.6096 Fax: 604.853.8749 Internet: www.bd-power.com
current
Mail: PO Box 231, Sumas, WA 98295
OBDII Port
5
Advertisement
Table of Contents
