Table of Contents
Advertisement
8 January 2009
BD Duramax 6.6L X-Tuner # 1054861/1054862
10
Recovery Mode
In the event of a status message during a programming sequence, the Ultra X-Tuner will
attempt to recover the vehicle to the original stock program. It is necessary to carefully
follow the screen prompts, possibly requiring multiple "Ignition OFF" and "Ignition ON"
sequences to correctly return the vehicle to stock settings.
When the recovery is completed, your vehicle is returned to factory stock. You are now
able to start your vehicle normally. You may not attempt to use the Ultra X-Tuner to
program your vehicle again or to program another vehicle (the tuner is now reset and not
locked to a vehicle). Follow the on-screen prompts. In the event that recovery is
unsuccessful, or fo any reason the Ultra X-Tuner fails to complete its programming cycle,
a status message will be displayed on the unit. Please make note of the message
displayed and contact BD Diesel Performance technical support department.
Setting Screen Contrast / Backlight
The Ultra X-Tuner's screen contrast and backlight level can be changed to the user's
preference. Select Tuner Setup from the main menu.
Select either "Set Contrast" or "Set Backlight",
depending on which option you would like to
change.
Settings range anywhere from 0-100%.
Tuner Updates
If the dealer flashes a new program onto your computer that is newer than the database
in the tuner, then the tuner will have to be updated. This is done by visiting
http://xtuner.bd-power.com/
through your preferred internet browser and clicking on the
"Ultra X-Tuner" link. Follow the screen prompts to install and update the software.
BD Engine Brake Inc
A10 – 33733 King Rd, Abbotsford, BC, Canada V2S 7M9
Ship: #88 – 446 Harrison St, Sumas, WA 98295
Mail: PO Box 231, Sumas, WA 98295
Ph: 604.853.6096 Fax: 604.853.8749 Internet: www.bd-power.com
Advertisement
Table of Contents
