Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Eurotron UniGas 3000+
Summary of Contents for Eurotron UniGas 3000+
- Page 1 Handheld Flue Gas Analyzers Boiler Tuning Units Instruction Manual MM850402 ed. 08b...
- Page 2 The instruments are fully tested in conformity with the directive n°89/336/CEE Electromagnetic Compatibility. Eurotron shall not be liable in any event, technical and publishing error or omissions, for any incidental and consequential damages, in connection with, or arising out of the use of this book.
-
Page 3: Table Of Contents
Instruction Manual MM850402 ed. 08b TABLE OF CONTENTS GENERAL DESCRIPTION ........................5 Ordering Code ..............................6 1.1.1 EcoLine 4000 ..............................6 1.1.2 GreenLine 4000 ............................... 8 1.1.3 Unigas 3000+..............................10 1.1.4 BTU 3000+..............................11 1.1.5 Flue gas probes ............................. 12 Specifications.............................. - Page 4 Instruction Manual MM850402 ed. 08b Flue Gas Analysis ............................... 31 Pressure/Draft measurement ..........................33 7.3.1 Pressure/Draft external probe (option for UniGas3000+) ................34 7.3.2 Burner Pressure Measurement ........................34 Smoke Measurement............................34 7.4.1 Smoke Index data input ..........................35 Combustion Air Temperature (option)......................... 35 Flow/Return Temperature measurement ......................
-
Page 5: General Description
The 3000-4000 series is designed to satisfy the market needs; they are the direct result of the advanced research and experience of Eurotron. Eurotron has been developing and manufacturing portable flue gas analysers since 1986. EcoLine 4000, GreenLine 4000, BTU 3000+ are UniGas 3000+ are multigas compact hand-held multifunctional instruments. -
Page 6: Ordering Code
Instruction Manual MM850402 ed. 08b Ordering Code 1.1.1 EcoLine 4000 7826 – A – B – CC – D – EEE – F – GGG – H Each EcoLine 4000 is equipped with a O sensor, internal 250 memory, realtime clock capabilities, USB serial cable, Gas configuration software, electrovalve for autozero quick start-up, magnetic rubber holster, rechargeable battery pack, battery charger and supplied with a Report of Calibration and an instruction manual. - Page 7 Instruction Manual MM850402 ed. 08b Table H Calibration certificate Eurotron report...
-
Page 8: Greenline 4000
Instruction Manual MM850402 ed. 08b 1.1.2 GreenLine 4000 7826 – A – B – CC – D – EEE – F – GGG – H Each GreenLine 4000 is equipped with a O sensor, internal 250 memory, real time clock capabilities, USB serial cable, Gas configuration software, magnetic rubber holster, electrovalve for autozero quick start-up, rechargeable battery pack, battery charger and supplied with a Report of Calibration and an instruction manual. - Page 9 Instruction Manual MM850402 ed. 08b Table H Calibration certificate Eurotron report...
-
Page 10: Unigas 3000
External Ambient CO probe (cat. BB830009) External Sniffer (natural gas checker) (cat. BB830010) External Manual pump for smoke measurement with filters and comparing table (cat. F7828000) External ionization current probe (cat. BB830019) 12Vdc auto battery charger (cat. BB290032) Table H Calibration certificate Eurotron report... -
Page 11: Btu 3000
External Ambient CO probe (cat. BB830009) External Sniffer (natural gas checker) (cat. BB830010) External Manual pump for smoke measurement with filters and comparing table (cat. BB610041) External ionization current probe (cat. BB830019) 12Vdc auto battery charger (cat. BB290040) Table H Calibration certificate Eurotron report... -
Page 12: Flue Gas Probes
Instruction Manual MM850402 ed. 08b 1.1.5 Flue gas probes Probes Code Description 90° FIXED long L=180mm+180mm Ø8mm TcK BB610043 FIXED hose length 3mt L=300mm Ø8mm TcK BB610046 FIXED hose length 2,5mt L=180mm Ø6mm TcK BB610047 FIXED hose length 2,5mt L=300mm Ø6mm TcK BB610048 FIXED hose length 3mt L=180mm Ø8mm TcK... - Page 13 Instruction Manual MM850402 ed. 08b Natural gas leak detection probe Pre-heating time: 30s minimum Alarms indication: visual with 5 steps 5 alarms levels: 100, 200, 300, 400, 500 ppm Acoustic Alarm indication: respectively 1, 2, 3, 5 bip/s, continuous Response time: 5s (t90) Alarm levels Accuracy: ±10% at 90 days Low Draft Probe •...
- Page 14 Instruction Manual MM850402 ed. 08b Accuracies and ranges Parameter Sensor type Range Resol. Accuracy responce ±0.1% vol. Electrochemical from 0 to 25.0% 0.1% 20 sec. ±10 ppm <300 ppm Electrochemical from 0 to 8000 ppm 1 ppm 50 sec. ±4% rdg up to 2000 ppm compensated ±10% rdg elsewere Electrochemical...
-
Page 15: General
Instruction Manual MM850402 ed. 08b GENERAL Keypad & Display The easy to use keyboard allows the operator to enter the main operative mode and all other complementary or auxiliary modes following the menu driven instructions. The high contrast graphic LCD (40x56 mm), equipped with an automatic back-light device, displays the measured and/or calculated parameters in the preferred format (Zoom function). -
Page 16: Smoke Measurement
2.12 Leak test procedure To check gas network tightness using a pressure decay method with programmable interval time. It uses the internal pressure sensor and a Eurotron leakage procedure. 2.13 External Low Pressure Sensor (UniGas 3000+) The UniGas 3000+ only can use the external Pa sensor for pressure and Draft (BB830025). The sensor is a unique vacuum meter with higher precision (±... -
Page 17: Calibration Certificate
2.18 Calibration Certificate Each 3000-4000 series portable gas analyzer, is factory calibrated and certified against Eurotron Standards, that are periodically certified by an International recognized Laboratory, and shipped with a Certificate of Calibration stating the nominal and actual values and the deviation errors. -
Page 18: Physical Description
Instruction Manual MM850402 ed. 08b PHYSICAL DESCRIPTION The 3000-4000 series portable analyzer consists of a rugged and compact case, a mother board with all base function circuits, 2, 3 or 4 electrochemical cells, a gas pump, a keyboard, an LCD backlighted display, a Li-Ion rechargeable battery pack and, optionally an impact printer. -
Page 19: Principle Of Operation
Instruction Manual MM850402 ed. 08b PRINCIPLE OF OPERATION The 3000-4000 series analyzer is based on the following functional blocks: 2° Sensor CO Water trap Gas outlet Line filter Pump 1° Sensoe O2 4° Sensor Gas input 3° Sensor INLET Differential pressure sensor P2 - ∆P... -
Page 20: Water Trap & Line Filter
Instruction Manual MM850402 ed. 08b 4.1.2 Water Trap & Line Filter The gas flows through an external combined water trap and line filter to avoid the presence of condensation and suspended solid particles in the analysis section of the instrument. A cylinder is positioned at 15 cm from the instrument gas inlet it is divided into two parts: the water trap and the line filter. -
Page 21: Auxiliary Measurements
Instruction Manual MM850402 ed. 08b = 40s to 90% of reading = 50s to 90% of reading = 40s to 90% of reading O OBTAIN AN ACCURATE MEASURE IT IS RECOMMENDED TO WAIT MINUTES Toxic gas sensor can be present a ±2% drift and a long resuming time it an excessive (>150% of F.S.) gas concentration is applied. -
Page 22: Smoke Index Measurement (Option)
Instruction Manual MM850402 ed. 08b 4.2.3 Smoke Index Measurement (option) This method consists of taking a gas sample from the center of the gas pipe behind the heat exchanger and crossing it through a special filter paper. The color of the spot on the filter is compared with a graduated (from 0 to 9) reference scale and it is called “smoke index”. -
Page 23: Recommendations
When the batteries will be discharged the symbol “–” will appear and the instrument still has about 20 minutes operation capability to end the running analysis. The battery symbol indicates that a full charge is required. Use only the dedicated battery charger supplied by Eurotron with the instrument. CAUTION: O... -
Page 24: Connections
Instruction Manual MM850402 ed. 08b CONNECTIONS Electro-Pneumatic Connections To prepare the instrument for operation connect the sampling probe to the instrument: • Plug the pneumatic connector of the probe to the GAS INLET connector. If you are using the gas sampling probe with Draft option, connect also its connector to the instrument Pressure/Draft inlet. -
Page 25: Connecting To A Pc
Instruction Manual MM850402 ed. 08b Tair probe CAUTION OR A CORRECT GAS ANALYSIS NO AIR MUST REACH THE FLUE GAS AS A RESULT OF NON TIGHT CONNECTION POINTS BETWEEN THE HEAT PRODUCER AND THE MEASUREMENT SITE PROBE HE FLUE GAS AND EXHAUST GAS PATHWAYS MUST BE CHECKED FOR GAS TIGHTNESS BEFORE CARRYING OUT A MEASUREMENT IF NECESSARY NON TIGHT POINTS SHOULD BE SEALED... - Page 26 Instruction Manual MM850402 ed. 08b “Control Panel \ Network and Dial-Up Connections”, right-clicking on the appropriate connection and selecting “Disable” from the menu. The connection can be re-enabled after the correct driver installation. This it’s not necessary if your computer runs Window™ XP SP2 if configured to ask before connecting to Windows Update. Windows™...
- Page 27 Instruction Manual MM850402 ed. 08b • Select the folder where the driver is present on the CD: • D:\\EE26032-SW-DRIVER USB-Serial FTDI, then select the folder referred to your operative system and click “OK”. The driver will be automatically installed on your system. NOTE: I -WHQL INDOWS...
-
Page 28: Operations
Instruction Manual MM850402 ed. 08b OPERATIONS Basic Operation All the procedures and programming operations on the 3000-4000 series, can be made using the keyboard and the display. ALL NUMERIC VALUES SHOWN IN THE FIGURES OF THIS MANUAL ARE INDICATIVE AND LISTED AS AN EXAMPLE The analyzer should be used in environments where the temperature does not exceed the specified limits (from -5°C to +45°C) and where the relative humidity is lower than 95% non-condensing. -
Page 29: Display
Instruction Manual MM850402 ed. 08b 7.1.2 Display The 3000-4000 series is designed with a large (40x56 mm) graphical display using an automatic back light system for the best reading poorly lit locations conditions also. The instrument is able to visualize simultaneously on the display 3, 6 or 12 parameters. -
Page 30: Text Input
Instruction Manual MM850402 ed. 08b CO Reference – ESCAPE The “ ” symbol below the first digit is the cursor. You can move the cursor between the digit using the [ ] and [ ] keys. You can change the selected digit using [ ] and [ ]. If “9” or “0” values are exceeded, the left digit is increased or decrease. -
Page 31: Flue Gas Analysis
Instruction Manual MM850402 ed. 08b Flue Gas Analysis Connect the gas probe to the analyzer as shown in chapter 7. If the optional Autozero valve is Not installed, DO NOT INSERT THE PROBE IN THE CHIMNEY. Switch the analyzer on pressing the [ON] key. The display will show the following page: EcoLine 4000 GreenLine 4000 Serial no.:... - Page 32 Instruction Manual MM850402 ed. 08b • Fuel selection. Move the cursor symbol “ ” on the desired row using the [ ] and [ ] keys. Press [ENTER] to change the value. See instruction on paragraph 8.1.6. • Tag selection. Move the cursor symbol “ ” on the desired row using the [ ] and [ ] keys. Press [ENTER] to change the value.
-
Page 33: Pressure/Draft Measurement
Instruction Manual MM850402 ed. 08b 10.9 % 8.1 % 5.3 % 123.0°C EffN -------- EffG -------- – GRAPHIC REF. O2 Dilution system can be used to extend the sensor measuring range up to 10%. Pressure/Draft measurement If the internal pressure sensor is installed (Table E=2 on ordering code), you can execute the pressure/Draft measurements using the standard probe or the special probe. -
Page 34: Pressure/Draft External Probe (Option For Unigas3000+)
Instruction Manual MM850402 ed. 08b Now you can proceed with the Smoke index measurement and/or the gas analysis. The memory stored value will be printed together with the analysis. 7.3.1 Pressure/Draft external probe (option for UniGas3000+) The pressure/Draft external sensor (BB830025) is a unique vacuum meter with higher both precision and resolution compared to the internal sensor. -
Page 35: Smoke Index Data Input
Instruction Manual MM850402 ed. 08b Compare the darkening of the filter with the smoke index table. The smoke index found does not exceed the ones defined by the current normative. We suggested to use a retaining cone during gas sampling. F YOU WANT TO PRINT THE SMOKE INDEX WITH THE ANALYSIS DATA YOU SHOULD DO THE MEASUREMENT BEFORE THE FLUE GAS ANALYSIS... -
Page 36: Gas Velocity Measurement
Instruction Manual MM850402 ed. 08b Use [ ] and [ ] to move the cursor symbol to “FLOW/RETURN TEMP” option Press the [ENTER] key to display the following page: FLOW/RETURN TEMP Temper.: 40.0 °C Flow...: 40.0 °C Return.: --.- °C Differ.: --.- °C –... -
Page 37: Printing The Analysis Data
Instruction Manual MM850402 ed. 08b K Vel. Dens.: 1.000 1.000 – – ESCAPE ESCAPE • To enter your value, use the [ ] and [ ] keys change the digit indicated by the arrow, and use the [►] and [◄] keys to move the arrow symbol on another digit. -
Page 38: Changing Paper And Ribbon
Instruction Manual MM850402 ed. 08b • Press [ESCAPE] (F1) to abort the printing. • Press [FEED] for paper advance. You can stop the paper advance by pressing the [ESCAPE] (F2) key. NOTE: 3000+ IF YOU RECALL THE LAST MEMORY USING THE VERAGE FEATURE ONLY... -
Page 39: Test A (1 Minute)
Instruction Manual MM850402 ed. 08b ATTENTION ±300 HE USAGE OF A PRESSURE HIGHER THEN A WILL DAMAGE THE THE PRESSURE SENSOR OF THE INSTRUMENT IN IRREVERSIBLE WAY CAUSING A PERMANENT DEFORMATION OF THE MEMBRANE 7.9.1 Test A (1 minute) This optional operative mode allows operator to find pipe leakage. To set and run leak test, press the [MENU] key from measuring page. - Page 40 Disp. Corr: 0.000 Suitability: Yes – ESCAPE Press the [PRINT] button to print the report LEGEND Eurotron S.p.A Time of the test Gas Type: City or Natural Unigas 3000+ Barometric Pressure Serial Number 000 P1: The Pressure initial Date: 00/00/0000...
-
Page 41: Test B (Programmable)
Instruction Manual MM850402 ed. 08b 7.9.2 Test B (programmable) This optional operative mode allows operator to find pipe leakage. The difference from Test A is the possibility for the use of programmable the time, to see ( the next paragraph).To set and run leak test, press the [MENU] key from measuring page. -
Page 42: Ambient Co Probe (Option)
Instruction Manual MM850402 ed. 08b LEGEND Eurotron S.p.A P1-P2-P3-P4 mmH O measures of pressure ∆P : Difference of pressure Unigas 3000+ ∆T : Difference of Time Serial Number 000 Date: 00/00/0000 Time: 00:00 P DECAY LEAK TEST B P1: 0.0 mmH P2: 0.0 mmH... -
Page 43: Natural Gas Leak External Probe (Option)
Instruction Manual MM850402 ed. 08b MEASURE TIGHTNESS TEST GAS LEAK PROBE AMBIENT CO T+RH% PROBE – NEXT ESCAPE Use the [ ] and [ ] keys to move the cursor symbol to “AMBIENT CO” option. Press the [ENTER] key to select the option. Press [ESCAPE] (F2) to return to the previous menu. Connect the probe to the unit and wait for the following page: AMBIENT CO Amb. -
Page 44: Internal Gas Sniffer Sensor (Option For Unigas 3000+ / Btu 3000+)
500ppm/box. Pressing the [ ] key you can return to 100ppm/box range. Eurotron suggest to use 100ppm/box for ambient gas checking and 500ppm/box for pipe gas leak testing. After zeroing, the boxes will fill proportionally with the reading and an beeping sound will advise the operator for gas... -
Page 45: Temperature & Humidity Probe (Option)
Instruction Manual MM850402 ed. 08b Use the [ ] and [ ] keys to move the cursor symbol to “MEASURE” option. Press the [ENTER] key to select the option. Press [ESCAPE] (F2) to return to the previous menu. MEASURE TIGHTNESS TEST GAS LEAK PROBE AMBIENT CO –... -
Page 46: Ionization Current External Probe (Option)
Instruction Manual MM850402 ed. 08b MEASURE TIGHTNESS TEST GAS LEAK PROBE AMBIENT CO T+RH% PROBE – NEXT ESCAPE Use the [ ] and [ ] keys to move the cursor symbol to “T+RH% PROBE” option. Press the [ENTER] key to select the option. Press [ESCAPE] (F2) to return to the previous menu. Connect the probe to the unit and wait for the following page: T+RH% PROBE Amb. -
Page 47: Memory Management
Instruction Manual MM850402 ed. 08b MEMORY MANAGEMENT The standard configuration include an internal memory to store up to 250 complete gas analysis tests divided by Tags (max. 40 tags). Each analysis includes 10 gas concentration values, data and time. Each Tag includes one or more analysis data and for them can store the Draft and smoke index values, the name, the address and the telephone of the customer, a plant ID and the auxiliary measurements. -
Page 48: Delete Memory
Instruction Manual MM850402 ed. 08b • You can set 3 rows of personal data of the selected tag by pressing [ID TAG] (F1). In this case the following page will be displayed: ID TAG R1 Plant R2 Boiler R3 Customer –... -
Page 49: Installing Dbgas 2004
DBGas 2004 is a PC Windows compatible software to manage all checks and measures activities on boilers and to transfer data from and to Eurotron Gas analyzers. The software is designed for a complete and efficient managing and recording of the boilers analysis data of your clients. DBGas 2004 allows you to have a no limits database on your PC with all customer and boiler’s information, to select up to 40 boilers (each one is associated to a Tag) to be checked, to... -
Page 50: Registering The Software
Standard edition: DBGas 2004 includes all options without database limits 8.5.3 Compatibility DBGas 2004 can run with most of the Eurotron flue gas analysers. The following list show the compatible instruments for this software revision. Compatible Flue Gas Analysers UniGas 2000+... -
Page 51: Software Configuration
Instruction Manual MM850402 ed. 08b Software configuration GasConfig software is a PC windows compatible program for configuring the 3000-4000 series flue gas analyzers. You can change all memory settings: displayed measurements pages, printed measurements layout, Alarms, Fuels coefficients, measuring technical units, etc. 8.6.1 How to operate using GasConfig When you run GasConfig, a 2 independent windows systems will be displayed on the PC monitor. - Page 52 Up to 10 different fuels coefficient tables can be programmed. Fuels You can set up to 6 different bargraphs (parameter and range). Bar graphs 3 service information lines can be programmed for factory co-ordinates. (We suggest to Service keep Eurotron telephone and fax numbers for your reference).
-
Page 53: Gasconfig Installation
Instruction Manual MM850402 ed. 08b 8.6.2 GasConfig Installation Software runs on IBM PC under WINDOWS 95/98/NT operative systems. Minimum requirements are a Pentium CPU with 16Mbyte Ram and 8 Mbyte on hard disk, a color monitor and a Microsoft mouse or a compatible one. In order to install the Software for Windows, follow the below procedure: •... -
Page 54: Configuration
Instruction Manual MM850402 ed. 08b CONFIGURATION Many parameters can be modified using the instrument keyboard. Pressing the [SETUP] key, you can change the current fuel, include or exclude the CO cell, change the technical unit, set the alarms, etc. The CONFIGURATION --- FUEL --- >... -
Page 55: Alarms
Instruction Manual MM850402 ed. 08b Alarms When you select the Alarms option, the following page will be displayed: ALARMS Alarm 1: O2 Enabled Thresh. 5.00 Type – NEXT ESCAPE Use the [ ] and [ ] keys to move the cursor symbol to the desired option. Press the [ENTER] key to change the value. -
Page 56: Sensor Diagnostic
The “SERVICE” option, allows you to read the information to contact us for service assistance and the information that we need to know for identify your instrument configurations: instrument configuration code and serial number, firmware version, etc. Press [SERVICE] (F1) to display the following page: Eurotron Srl Tel. 022488201 Fax 022440286 Mod UniGas 3000 Cod F7823-1-x-0- 106029 V: 10.108... -
Page 57: Maintenance
Instruction Manual MM850402 ed. 08b MAINTENANCE The 3000-4000 series analyzer has been developed and manufactured using high quality components. A correct, systematic maintenance will prevent damage and will increase the life of the instrument, giving excellent results. Any conditions that require extraordinary maintenance interventions are promptly displayed, either clearly or with an information code. -
Page 58: Error Messages
If analyzer and any errors or trouble, it displays a message on the LCD screen. Sometimes also these messages corresponds to a unrecoverable problem and it is necessary to return the instrument to Eurotron for maintenance. Frequently these message are referred to a recoverable trouble and can be solved by yourself. -
Page 59: Clock
Instruction Manual MM850402 ed. 08b SET-UP Pag.1 Clock Serial Port Analysis par. P decay Time – NEXT Press the [NEXT] (F1) key to change menu page. SET-UP Pag.2 PRINTER TEST CLOCK TEST TEST OUTPUT TEST KEYBOARD – NEXT Use the [ ] and [ ] keys to move the cursor symbol to the desired option. Press the [ENTER] key to enter in the option set-up page. -
Page 60: Analysis Par
Instruction Manual MM850402 ed. 08b Serial Port Address Baud-rate : 9600 – ESCAPE Use the [ ] and [ ] keys to move the cursor symbol to the desired option. Press the [ENTER] key to set a new ID number or baud rate. Press [ESCAPE] (F2) to return to the previous menu. -
Page 61: Firmware Upgrade
Instruction Manual MM850402 ed. 08b 10.4 Firmware Upgrade 10.4.1 Firmware Upgrade: PC software In order to upgrade the firmware of the instrument proceed as follows: 1 - Install the ST167Flash program from the CD. 2 - Connect the infrared interface adapter to the serial port of the PC with the supplied cable (note back the serial port used: COM1 , COM2 or other). -
Page 62: Smoke Pump Maintenance
Instruction Manual MM850402 ed. 08b 10.5 Smoke Pump Maintenance Gas-Tight Checking To have a correct measurement the pump should be gas-tight. Turn the screw and close the probe with your finger. Pull the plunger for 3 cm and verify that the gasket does not leak the vacuum. If a leak is found the gasket needs to be lubricated. -
Page 63: Certificates
The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent breakage in transit. Eurotron‘s WARRANTY does not apply to defects resulting from any action of the purchaser, including but not limited to mishandling, improper interfacing, operation outside of design limits, improper repair, or unauthorized modification. This WARRANTY is VOID if the unit shows evidence of having been tampered with or shows evidence of being damaged as a result of excessive corrosion;... -
Page 64: Appendix
Instruction Manual MM850402 ed. 08b APPENDIX... -
Page 65: A1 Example
Instruction Manual MM850402 ed. 08b Example The following steps show how you can make a quick measurement using the GreenLine 4000 portable analyzer. Turn the GreenLine 4000 on. It will begin the autozero and the autodiagnostic procedure. System error and trouble will be displayed if encountered. -
Page 66: A2 Emc Comformity
Instruction Manual MM850402 ed. 08b EMC Comformity The instrument casa, made in shock-resistant injection moulded ABS + polycarbonate fulfil the prevision of the directive 89/336/CEE Electromagnetic Compatibility. -
Page 67: Declaration Of Conformity
Instruction Manual MM850402 ed. 08b Declaration of Conformity Eurotron Instruments S.p.A. We : (Supplier's name) Viale F.lli Casiraghi 409/423 20099 Sesto S. Giovanni (MI) - Italy (Address) declare under our sole responsibility that the product : Palmtop flue gas analyser mod. EcoLine 4000 (Name and type) cat. - Page 68 Instruction Manual MM850402 ed. 08b Declaration of Conformity Eurotron Instruments S.p.A. We : (Supplier's name) Viale F.lli Casiraghi 409/423 20099 Sesto S. Giovanni (MI) - Italy (Address) declare under our sole responsibility that the product : Palmtop flue gas analyser mod. GreenLine 4000 (Name and type) cat.
- Page 69 Instruction Manual MM850402 ed. 08b Declaration of Conformity Eurotron Instruments S.p.A. We : (Supplier's name) Viale F.lli Casiraghi 409/423 20099 Sesto S. Giovanni (MI) - Italy (Address) declare under our sole responsibility that the product : Palmtop flue gas analyser mod. UniGas 3000+ (Name and type) cat.
- Page 70 Instruction Manual MM850402 ed. 08b INDEX Accessories; 62 Features and Benefits; 5 Accuracies and ranges; 14 Firmware Upgrade; 61 Alarms; 55 Flow/Return temperature; 35 Ambient CO probe; 12; 16 Flue gas analysis; 31 Ambient CO Probe; 42 Fuel technical data; 15 Ambient T+RH probe;...
- Page 71 Instruction Manual MM850402 ed. 08b Natural gas leak detector; 43 Select by a list; 30 Natural gas probe; 16 Sensor Diagnostic; 56 Numerical input; 29 Serial port; 59 Service Data; 56 Set-up menu; 58 Smoke index measurement; 22 Smoke measurement; 16; 34 OPERATIONS;...
Need help?
Do you have a question about the UniGas 3000+ and is the answer not in the manual?
Questions and answers