Table of Contents
Advertisement
Installing the Cisco NCS 4201
To Download the driver, you must have a valid service contract associated to your Cisco.com profile.
Note
Step 1
Unzip the file asr-9xx_usbconsole_drivers.zip.
Step 2
Double-click xrusbser_ver2100_installer.exe in the XR21x141x-Win-DriversOnly-Vers2.1.0.0/EXE folder. Installation
Wizard GUI is displayed.
Step 3
Click Next. The InstallShield Wizard Completed window is displayed.
Step 4
Click Finish.
Step 5
Connect the USB cable to the PC and chassis USB console ports. Follow the on-screen instructions to complete the
installation of the driver.
Step 6
XR21V1401 USB UART Device driver successfully installed message is displayed.
The USB console is ready for use.
Uninstalling the Cisco USB Device Driver
This procedure describes how to uninstall the Microsoft Windows USB device driver in Microsoft Windows
XP / Windows Vista / Windows 2000 / Windows 7 / Windows 8.
Disconnect the chassis console terminal before uninstalling the driver.
Note
Step 1
Choose Start > Control Panel > Add or Remove Programs (Uninstall a program).
Step 2
Scroll to Windows Driver Package - Exar corporation (xrusbser) Ports and click Remove. The Program Maintenance
window is displayed.
Step 3
Click Yes to uninstall the driver.
Connecting to the EIA Console Port
The US-to-RJ45 adapter cable and the DB9 console cable are not included with the Cisco NCS 4201; they
Note
can be ordered separately from Cisco.
The serial console cable kit is not included with the Cisco NCS 4201; it is ordered separately.
Note
Connecting to the EIA Console Port
Cisco NCS 4201 Hardware Installation Guide
37
Advertisement
Table of Contents
