Ace K9 HA-2520 Installation Manual page 11

Step 13 Test Heat Alarm portion of the System
Check your settings, the Default Hot Temperature setting is 90 Degrees Fahrenheit.
(32 ◦ c), The Stall monitor should be enabled only if a stall sensor has installed.
To review or change these settings enter Menu mode See the User Guide.
Test Procedure for K9 Heat Alarm Pro HA-2520
1) Power. The Default Power Settings is Heat Alarm ON with Ignition. When Ignition is
turned ON, the Heat Alarm will power up.
2) System Status. Observe the Temperatures and Vehicle's Battery Voltage. The Hot Status
light will be illuminated when the Displayed Temperatures are below the Heat Alarm Hot Set
Point and the System in not in Snooze Mode.
3) System Output Test. Press the MENU key (for a second) to review or change the
Feature Settings or Power Settings. Use the arrow keys to scroll through the Menu. The last
Menu choice is "System Test", Press OK to start test of all the installed Heat Alarm Alert
options. Verify that ALL the installed Heat Alarm Alert Options worked. Follow remaining
prompts to check control head function.
*New AceWatchDog systems need configuration by the end user. See AceWatchDog
instructions to verify that it's connected to the network.
4) Test Temperature Sensors. With the Hot Status light illuminated, Turn the Vehicle's
Climate Control to the Heat Position to manually raise the Temperature inside the vehicle.
Monitor the Temperatures displayed on the heat alarm and confirm that the alarm activates
when the Hot Set Point is reached (Center Temperature is the average of left and right
sensors when the Average Temperature exceeds the hot or cold set points the alarm will
Sound after the Pre Alert.) Return the Vehicles Climate Control to the appropriate position.
DO NOT HEAT TEMPERTURE SENSORS WITH HEAT GUN OR FLAME TO TEST!
If any of these tests fail please check the installation.
Contact AceK9.Com Support with the Serial Number, Call 772-600-7574
Be sure K9 handler receives a copy of the User Manual.
Acek9.com Two (2) Year Limited Warranty
For details visit http://www.acek9.com
10