Table of Contents
Advertisement
In the previous example, IST devices on the first and the second Phone Line
Manager will have equal outbound access to the three telephone lines on their
own Phone Line Manager. The fourth outbound call will be networked to the
other Phone Line Manager and have access to those three telephone lines over the
network link that is provided.
The RJ-11 jacks on the back panel labeled DATA are for field service and
diagnostic use only, and should be left unconnected in the Plug and Play Phone
Line Manager XLO setup.
3.2 Setting the Switches
Ln 1
SW1-1 SW1-2 SW1-3 SW1-4 SW1-5 SW1-6 SW1-7 SW1-8
Line
ON
Present
Ln Not
OFF
Present
Ln 5
SW2-1 SW2-2 SW2-3 SW2-4 SW2-5 SW2-6 SW2-7 SW2-8
Line
ON
Present
Ln Not
OFF
Present
Table 3-2. SW1 Configuration
Ln 2
Ln 3
ON
ON
OFF
OFF
Table 3-3. SW2 Configuration
Ln 6
Ln 7
ON
ON
OFF
OFF
Ln 4
Ln 1
ON
OFF
Ln 8
Ln 5
ON
OFF
CHAPTER 3: Installation
Ln 2
Ln 3
Ln 6
Ln 7
Ln 4
Ln 8
15
Advertisement
Table of Contents
