Advertisement
Charging the Battery
IMPORTANT: Batteries need to be fully charged before initial use.
Do NOT charge batteries in direct sunlight. Charge in temperatures between 41–104° F.
1. Remove battery from drill/worklight by pressing the battery release button and sliding
it forward. If the battery feels overly warm, allow it to cool down before charging.
2. Connect the battery charger to an electrical socket. The green light will illuminate.
3. Insert the battery into the charger. While the battery is charging, the red light will
blink and the green will stay steady. Once the battery is fully charged, both red and
green lights will shine steadily.
4. To remove the battery from the charger, press the release button on the battery.
NOTE: If the red light on the charger blinks three times per second while the green light
is steady, the battery needs to be replaced.
IMPORTANT: Batteries should be fully charged for long-term storage.
Overload Protection
The reciprocating saw and its battery have built-in safety features to prevent
damage to the tool and battery during use.
•
During short-term high-load situations, the overload protection will automatically
turn off the saw. If this happens, release the trigger, wait a few seconds, ensure
that there is no load and then restart the saw. For high-load situations that oc-
cur for an extended period of time, wait until the saw returns to normal operat-
ing temperature before trying to restart it. Adverse temperatures can occur in
direct sunlight and should therefore be avoided.
•
When the battery becomes discharged, the low-voltage protection turns off the
saw automatically. Recharge the battery to continue use.
8
Wards.com
Parts & Features Worklight
How to Use the Worklight
1. Insert rechargeable battery and push until it clicks in place.
2. Press the power button to turn the worklight on or off.
3. Pivot the worklight head up to 95°.
4. To remove the battery, press the battery release button.
1
888
•
1
2
1. Pivot connection
2. Power button
3
3. Grip handle
4. Battery release button
4
557
3848
•
•
9
Advertisement
