Advertisement
Important Safeguards
CORDLESS POWER TOOL GENERAL SAFETY:
1. Power tool should be switched to OFF when installing battery to avoid
equipment damage and personal injury.
2. Do NOT expose power tools to extreme temperatures or fire.
3. To protect against electrical shock, do not place or use power tool in water or
other liquid.
4. Avoid contact with corroded or damaged batteries.
5. Do NOT operate any power tool that malfunctions or has been damaged in any
manner. Call our toll-free customer service number for information regarding
replacement or returning the product.
6. Do NOT use tool for anything other than its intended use.
RECIPROCATING SAW SAFETY:
• Use clamps or other practical ways to secure and support the workpiece to
a stable platform. Holding the workpiece by hand or against your body is
unstable and may lead to loss of control and personal injury.
• When using the reciprocating saw, always maintain a firm grip on the tool
with both hands. NEVER put your hands or feet in the cutting area. Do NOT
grasp the tool or place your hands too close to the blade. Keep your hands
well away from the blade. NEVER reach underneath the tool while the blade
is in motion.
• When sawing into walls or other places where there might be hidden
electrical wires, cut off the power supply to any wiring circuits which may
be hidden behind the wall. Grip only the handles of the reciprocating saw.
NEVER grip any metal parts of the saw when cutting in areas where there
might be live electrical wires.
• Do NOT use blunt or damaged saw blades. Bent saw blades can easily
break or cause kickback.
• Make sure that the settings are correct and that the blade is securely
fastened in the blade holder before beginning to saw.
• Start the saw and let it get up to speed before starting to cut.
• Do NOT operate reciprocating saw with the Allen key in the socket head.
• Do NOT use reciprocating saw near flammable liquids, gases or dust.
Power tools generate sparks that can easily ignite dust or fumes.
4
4
(cont'd)
Wards.com
Important Safeguards
WORKLIGHT SAFETY:
1. Worklight is not waterproof. Do NOT use in areas of high humidity.
2. Do NOT use the worklight in environments containing flammable liquids or gases.
3. NEVER look directly into the beam and do not shine the light at another
person's eyes.
IMPORTANT: Neither the reciprocating saw nor the worklight contain user
serviceable parts. Do NOT try to repair either of them yourself. If problems occur,
call our toll-free customer service number for information regarding replacement
or returning the product.
Parts & Features Reciprocating Saw
3
2
1
9
1. Cutting blade (1–wood; 1–steel)
2. Footplate
3. Blade clamp
4. Variable speed power trigger
5. Safety lock button
(cont'd)
4 5
8
6. Rear handle
7. Allen key holder
8. Battery connection
9. Front handle
1
888
557
3848
•
•
•
6
7
5
Advertisement
