Page 2
050-Gas is simplicity itself. To operate just turn on the gas, press the ignition switch, and the gun will be ready for use in approximately 5 minutes. Glue sticks can be fed ® ® continuously through the back of the gun. Use only genuine Loctite Hysol adhesive sticks Items supplied...
Page 3
When refilling, ensure that you switch off the tool before commencing, and that you keep away from sources of ignition. • ® ® adhesive stick (see figure 1 k). Load the tool with a Loctite Hysol • Switch on the gas by rotating the ‘gas on/off’ switch counterclockwise to position ‘I’ (see figure 1l). •...
Figure 1. ‚ Load Glue Stick … Ignition View Window „ Gas Ignition Button ‡ Trigger ƒ • Gas On/Off Switch Gas Filler † Fold-away Stand PREVENTATIVE MAINTENANCE • Do not use excessive force on the trigger. Ensure that the tool has fully warmed up before use. •...
® ® Use only genuine Loctite Hysol adhesive sticks to ensure reliable performance. Loctite Hysol adhesive sticks are non-toxic and non-flammable. REPLACING THE NOZZLE Only replace the nozzle while the tool is still warm. Disconnect the tool from the power supply before proceeding, and always use protective gloves.
Page 6
GUARANTEE ® ® The Loctite Hysol 050-Gas is guaranteed against faulty workmanship and materials for a period of 12 months from the date of purchase. Within this warranty period the manufacturers undertake, at their discretion, to either repair or replace any tool proved to be defective (proof of purchase will be required for verification).