Advertisement
Patch Examples:
9
"DJ" Cueing System
Patch two audio signals to Ch. A and Ch. B Inputs.
Choose patch to send to PA with Crossfader,
output Master Line Output to PA. Monitor Cue
Output with headphones to audition the other
patch. When ready, use Crossfader to switch to
the other patch in the PA.
Two-input mixer
Patch two audio sources to Ch. A and Ch. B Inputs.
Set mix with Crossfader. Take output from Master
Line Output. With mix at 50%, the Master and Cue
Outputs are identical, allowing multiple sets of
headphones to monitor.
Mono/Stereo E ects Loop
Start with DJ Cueing or Two-Input Mixer patch.
Patch Send output to e ects module of your
choice, such as Erbe-Verb or Echophon. Set e ects
module Mix control to 100% wet, and patch its
output to Mono Return input. For Stereo e ects,
patch left and right outputs of stereo e ects
module (such as Erbe-Verb) to L and R Return
inputs on Rosie. Set e ects volume with Return
level control. Optional: Patching a VCA in series
allows dynamic control of e ects volume. For
example, patch Send to an Optomix, take Ch1
Output to the Erbe-Verb Input, and use a cycling
MATHS channel patched to the Optomix Control
Input to dynamically modulate the level of signal
being sent to the Erbe-Verb.
Advertisement
