Download Print this page

Advertisement

Quick Links

MA1602-EA
© 2016 CASIO COMPUTER CO., LTD.
Before Using the Watch for the First Time
Crown Operations
Some water-resistant models (100 meters, 200 meters)
have a screw-in crown. When you need to perform a crown
operation, rotate it towards you to unscrew it. Then pull
the crown out. Avoid applying undue force when pulling.
The watch loses its water resistance while the crown is
unscrewed. After performing a crown operation, fully screw
the crown back in.
If your watch has a rotary bezel...
You can rotate the bezel to align its ▼ mark with
the minute hand. Then you will be able to tell how
much time has elapsed since aligning the ▼ mark.
E-2
Low Battery Alert ............................................................................. E-21
If watch operation is abnormal ... .................................................... E-22
Specifi cations ................................................................................... E-23
Operating Precautions ...................................................................... E-24
User Maintenance ............................................................................ E-34
E-4
Adjusting the Time Setting
Perform the procedure below whenever the position of any of the hands is incorrect.
Important!
When setting the time, be sure to set the position of all of the hands. If you change
the position of only one hand, the other hands will still be incorrect.
1. Just as the second hand reaches 12 o'clock, pull out the crown to the
second click.
This will stop the second hand.
2. Rotate the crown to set the main hour and minute hands.
Take care that you set the correct AM or PM time. Watch the day indicator when
the hour hand passes 12 o'clock. If the day indicator changes, it means you just
passed midnight.
Set the hands to a time that is a few minutes past* the actual current time.
* Since you will re-start timekeeping in step 8 of this procedure, you should allow
a few minutes to perform the other steps before that.
E-6
3. Use B to move the alarm hands to the same setting as the main hands.
The alarm time does not distinguish between a.m. and p.m.
Holding down B moves the hands at high speed.
4. Hold down A for about two seconds.
This will cause the World City hand to make one revolution.
E-8
Operation Guide 5473/5498
Current
30
10:08
Be sure to keep all user documentation handy for future reference.
Your watch may differ somewhat from the one shown in the illustration.
Contents
Crown
Before Using the Watch for the First Time .......................................... E-2
Indicators and Crown Operation ......................................................... E-5
Adjusting the Time Setting ................................................................. E-6
To change the day indicator setting ............................................................E-12
Loosen
World Time ....................................................................................... E-13
Using the Alarm ................................................................................ E-17
Start
To set an alarm time and turn on the alarm .................................................E-18
To cancel a previously set alarm .................................................................E-20
To test the alarm ........................................................................................E-20
Elapsed time
Indicators and Crown Operation
World Time hands (12-hour)
Main hour hand
Second hand
Alarm hands (12-hour)
World City hand
World Time
Shows the current time in the selected
World City.
When setting the minute hand, move it four or fi ve minutes past the desired
setting, and then back it up.
Example: To set a time of 10:08
5. Use B to move the World City hand to the city that matches your current
location (time zone).
Holding down B moves the hand at high speed.
For information about time zones, see the City List on page E-15.
Example: TOKYO (TYO)
Main minute hand
Click 1
30
Crown
Day indicator
Alarm
Shows alarm time setting when alarm is
on, current time when alarm is off.
30
30
Align the hand with the
center of the city name.
ENGLISH
E-1
E-3
Click 2
E-5
E-7
E-9

Advertisement

loading

Summary of Contents for Casio 5498

  • Page 1 MA1602-EA © 2016 CASIO COMPUTER CO., LTD. Operation Guide 5473/5498 ENGLISH Be sure to keep all user documentation handy for future reference. Your watch may differ somewhat from the one shown in the illustration. Before Using the Watch for the First Time...
  • Page 2: World Time

    Operation Guide 5473/5498 6. Hold down A for about two seconds. Note This will cause the World Time Hour hand to make one revolution. Holding down A for about two seconds will cycle the currently selected hand in the sequence below.
  • Page 3 Operation Guide 5473/5498 To cancel a previously set alarm Low Battery Alert 1. Pull the crown out to the fi rst click. Second hand moves in 2-second increments when power is low. Replace the battery 2. Hold down B and the alarm hands will start to move.

This manual is also suitable for:

5473