Overview; List Of All Rooms - Schrack Seconet VISOCALL IP User Manual

Ward Terminal DZT-IP - Overview

6. Overview

Using Fig. 1 as a starting point, you enter the room list for the ward in question (Fig. 11) by
pressing the blue key on the left hand side next to the „overview"
6.1

List of all rooms

Status line
Function line
On the left hand side of the display, the rooms in the ward are shown with the corresponding
presence and/or reminders that have been set at the same time. By pressing a blue key to the
left of it, you can enter the submenu for the corresponding room.
By pressing the yellow key on the left hand side down below, the display changes so that dif-
ferent fi lter functions become available. It is thereby possible, for example, to only display
rooms, in which nurses have set their presence.
The following fi lter settings are possible:
• List of all rooms (Fig. 11)
• List of rooms with set presence (Fig. 12)
• List of rooms in which a reminder has been set (Fig. 13)
• List of rooms with care group assignment (Fig. 14)
14 DZT-IP V3.1 - User manual
symbol.
Fig. 11
K-HB-010EN