INSTALLATION OF THE APPLIANCE IN COLUMN
Insert the appliance into the column, placing it
on the opposite site of the hinges, and make
sure 3-5 mm distance gap.
1
Screw the appliance lower part
3
Use a cross-screwdriver to loosen the
connecting pin underneath the right middle
hinge, and adjust to screw onto the right
cabinet wall.
5
After ensuring the match between appliance
door and column door, then screw the
appliance upper part to the cabinet
2
Fit the seal to the appliance, cut off the
excessive part if necessary. Fit the bottom
parts with plastic covers.
4
EN 8