Page 1
Installation and user manual for Viridian EcoLite 3,7kW til 22kW English Elbilgrossisten AS Postal address: Kontaktinformasjon: Stockholmgata 20 Elbilgrossisten AS Tel: +47 23 90 55 15 0566, Oslo Postboks 6679 Rodeløkka Mail: kundeservice@elbilgrossisten.no 0502, Oslo Side 1 av 10...
Tables of contents TECHNICAL INFORMATION ABOUT VIRIDIAN ECOLITE CHARGING STATION ........3 1.1T ..............................3 SOCKET 1.2 T ..........................3 ECHNICAL SPECIFICATIONS 1.3 O ............................... 3 PERATING 1.4 D ..............................3 IMENSIONS INSTALLATION OF VIRIDIAN ECOLITE CHARGING STATION ..............4 2.1 C...
1.0 Technical information about Viridian EcoLite charging station Viridian EcoLite charging station is developed to supply power to electric vehicle. The charging station comes with a residual current device Type B to protect against direct current (DC) leakage (pulsating and smooth DC) which may occur after the cars rectifier and might leak back onto the power line.
2.0 Installation of Viridian EcoLite charging station The charging station is designed to be mounted on a wall, ladder pole or other suitable fixed installation. NB! Do not drill in the enclosure/housing as this compromise the corrosion resistance of the housing.
2.2 Mounting of charging station Elbilgrossisten AS Postal address: Kontaktinformasjon: Stockholmgata 20 Elbilgrossisten AS Tel: +47 23 90 55 15 0566, Oslo Postboks 6679 Rodeløkka Mail: kundeservice@elbilgrossisten.no 0502, Oslo Side 5 av 10...
Page 6
Elbilgrossisten AS Postal address: Contact information: Stockholmgata 20 Elbilgrossisten AS Tel: +47 23 90 55 15 0566, Oslo Postboks 6679 Rodeløkka Mail: kundeservice@elbilgrossisten.no 0502, Oslo Page 6 of 10...
3.0 Adjusting the amperage / number of amps The charging station is delivered with 32A as standard (maximum) and is adjusted by mounting a resistance between the IC and 0V on the charge controller. Resistance is installed by removing the cover at the charging station and loosening two wing nuts (one on each side of the type 2 connector).
5.0 Safety mechanisms The charging station comes with several safety mechanisms to ensure the charging process is safe and secure. 5.1 Type 2 connector / outlet Before charging starts, the Type 2 connector will lock the plugs to the charging station when the plug is connected to the charger connector on the charging station and the vehicle.
6.0 Error messages Error message # 1: The charging process will not start. 1) Check the RCD and circuit breaker a. The RCD might have been triggered due to security reasons 2) Check if the car signals an error message. (e.g. charging not possible) a.
Warranty Your Viridian charging station comes with three (3) years factory warranty. Contact us as soon as possible if you were to receive a defective / damaged product or if an electrician is unable to install the charging station due to a malfunction of the product. We ask that you take pictures if you get one that is physically damaged to ensure the fastest possible warranty procedure.
Need help?
Do you have a question about the EcoLite and is the answer not in the manual?
Questions and answers