Rfid Operation; Data Reading & Stop - INSIGHT SHARK-R300-KR User Manual

4. 7 RFID Operation

4. 7. 1 Data Reading & Stop
There are 2 ways to read RFID Data, using SHARK.
The procedures are as follows.
Step 1) Check the SHARK Operation Mode
Step 2) Press Gun button and hold, then Data Reading will begin. If you want to stop, release Gun button
NOTE:
 SHARK mode must be RFID mode.
 If RFID Reporting parameter is Unique and if S-RAM has data that is stored in S-RAM,
then total data count will not be incremented
SHARK User Manual
Using GUN button
The Best in the RFID Business
38