ZyXEL Communications ZyWall 2 Quick Start Manual page 4

LED COLOR STATUS
PWR Green On
Off
SYS Green Off
On
Flashing The ZyWALL is rebooting.
Red On
LAN Green On
10/100M Orange On
1-4 Flashing
Off
10/100M Green On
WAN Orange On
Flashing
Off
CON/AUX Green Off
On
Orange Off
On
Flashing The CON/AUX switch is set to AUX and the CON/AUX port is
ZyWALL 2
Table 1 LED Descriptions
The ZyWALL is turned on.
The ZyWALL is turned off.
The ZyWALL is not ready or failed.
The ZyWALL is ready and running.
The power to the ZyWALL is too low.
The ZyWALL has a LAN connection of 10Mbps.
The ZyWALL has a LAN connection of 100Mbps.
The ZyWALL is sending/receiving packets.
The ZyWALL does not have an Ethernet connection.
The WAN link is connected at 10Mbps.
The WAN link is connected at 100Mbps.
The WAN link is sending/receiving packets.
The WAN link is not ready, or has failed.
The CON/AUX link is not ready, or has failed.
The CON/AUX switch is set to CON and the CON/AUX port is
connected to a management computer.
The CON/AUX link is not ready, or has failed.
The CON/AUX switch is set to AUX and the CON/AUX port has an
Internet connection through a dial-up modem.
sending or receiving data through a dial-up modem.
4
MEANING