ZyXEL Communications ZyWall 2 Quick Start Manual page 11

Step 3. Fill in the fields and click Finish to save and complete the wizard setup.
ZyWALL 2
11
Choose PPTP if your service
provider uses a DSL terminator
with PPTP login. The ZyWALL
must have a static IP address (My
IP Address) in this case, and
possibly a subnet mask (My IP
Subnet Mask) if provided by your
ISP.
You'll also need a username,
associated password, and the DSL
terminator IP address (Server IP
Address). If your ISP has provided
a connection ID name, enter it in
the Connection ID/Name field.
See the PPPoE encapsulation
above for information on the
Nailed Up Connection and Idle
Timeout fields.
Click Next to continue.
WAN IP Address Assignment
Select Get automatically from
ISP if your ISP did not assign
you a fixed IP address. Select
Use fixed IP address if the ISP
assigned a fixed IP address and
then enter your IP address and
subnet mask in the next two
fields. Enter the gateway IP
address in this field (if provided)
when you select Use Fixed IP
Address.
System DNS Servers
Select From ISP if your ISP
dynamically assigns DNS server
information (and the ZyWALL's
WAN IP address). The field to
the right displays the (read-only)
DNS server IP address that the
ISP assigns.
Select User-Defined if you have
the IP address of a DNS server.
Enter the DNS server's IP
address in the field to the right.