Installation; Before You Begin; Tools And Parts Needed; Parts Included - Bosch HWD57 Installation Manual

Installation
Before you Begin
Tools and Parts Needed
• T-20 star head screwdriver
• Measuring tape
• Drill with bit (1/8")
Parts Included
• T-20 star head screws, #8xl/2" (8)
General Information
Flush Installation
Top View Side View
17/d ' (22) 7/8" (22)',
_.hl c lleats cleats _
(25)_ I_28w,
(724) _I
30 /4' (768)
flush inset
depth
cleats (25)
LC 11/16''
(246)
flush
ut out
height
(622)
Measurements in inches (ram)
Power Requirements and Grounding
Circuit Specifications: 120V, 15A, 60Hz
The outlet must be properly grounded in accordance with
all applicable codes.
Installation Dimensions
Instructions are based on standard (in the U.S.A.) cabinets
36" (914 mm) high and 24" (609 mm) deep with a 25" (635
mm) countertop. If using non-standard cabinets, alter
dimensions accordingly.
30" Warming Drawer
Unit and Cabinet Dimensions
Cabinet opening bottom must be able to support 110
pounds (50 kg).
/-"_283/16 .
231/2"
(597)
--\
43/_
(121.-964
Measurements in inches (mm)
27" Warming Drawer
Unit and Cabinet Dimensions
Cabinet opening bottom must be able to support 110
pounds (50 kg).
....._253/16 ''
23112 ''
(597)
\
4 /4"- 38"
(121.-96z
>% I
Measurements in inches (mm)
Flush Installation
Top View
vl ,'7/8" (22) 7/8" (22)I
i
(25)_
I_25w, (648) _I
271/4" (692)
241/2"
(622)
flush inset
depth
Side View
cleats (25)
_ 11/16 "
(246)
flush
cut out
height
/ \
91/16" 91/4"
(230) (235)
product opening
height cut out
height
241/2 ''
622)
Measurements in inches (mm)
English 3