Samsung WS32Z78RSMXXEG Service Manual page 21

Alignment and Adjustments
4-3 FACTORY MODE CONTROL
4-3-1 Factroy Mode Data Control
1. Enter & Concel the Factory Mode
1) Usual Remote Control
Enter : PICTURE OFF -> DISPLAY KEY -> MENU KEY -> MUTE KEY
(Press each remote control key with in 3 seconds)
Cannel : POWER OFF -> ON
2) Factory Remote Control
Enter : DISPLAY KEY -> FACTORY KEY
(Press each remote control key with in 3 seconds)
Cannel : POWER OFF -> ON
Press the FACTORY key twice at intervals of at lease 1 second.
(Enter the AGING Mode once)
3) Set Value When Entering the Factory Mode
- Picture Mode & Sound Mode are set to the standard data
- Scan Mode : Natual Scan(NT/PAL All)
- Brigntness : Contrast : 100
4) Adjustments
- CH. UP/DOWN Key : Use to select the item you want
- VOLUME UP/DOWN Key : Increases or decreases the value of data.
- MENU Key : Use to save the current set value in EEPROM and exit to the upper mode.
- Use the DIGIT Key to switch channels
- Use the TV/VIDEO Key th conver to the AV Mode
4-4 FACTORY ADJUSTMENT DATA
VIDEO ADJUSTMENT
Y.C-DELAY
DEFLECTION NORMAL
DEFLECTION VGA
DEFLECTION NORMAL[1080i]
DEFLECTION NORMAL[480P]
PICT. IMPROVE [PAL]
PICT. IMPROVE [NTSC]
PICT. IMPROVE [VGA]
PICT. IMPROVE [SECAM]
PICT. IMPROVE [DVD]
PICT. IMPROVE [480P]
PICT. IMPROVE [1080i]
P.STD CHANGE
OPTION BYTE
RESET
4-10
Bright : 50
sharpness : 50 Color tone : Center
Color : 60
Samsung Electronics