Omron BNB300T Instructions Manual page 16

7
. Insert a new battery into the UPS as far as it will go. 1)
 Replacement battery pack
For BN220T/BN300T: Model BNB300T
Attach the plate cover in order of 2) to 3).
Use a screwdriver to securely tighten (clockwise) the 2 screws you removed. 4)
Do not pinch the cable with the plate cover.
1)
8
. Insert a new battery into the UPS as far as it will go. 1)
 Replacement battery pack
For BN220T/BN300T: Model BNB300T
Attach the plate cover in order of 2) to 3).
Use a screwdriver to securely tighten (clockwise) the 2 screws you removed. 4)
Do not pinch the cable with the plate cover.
1)
9
. Insert the connector until it is locked. 1)
Hold the battery connector, move the connector hook to the center of the fastening hole
in the plate (2)-1), insert through the hole (2)-2), and lower the connector to lock in the
hole (2)-3).
Do this for both battery connectors.
Note: You may hear a "pop" sound when you connect the battery if it is replaced after the
16
2)
2)
unit's operation is stopped, but this sound is not abnormal.
1)
2)-1 2)-2
Connector's hook
align the hole
Tighten the 2 screws.
3)
Tighten the 2 screws.
3)
1)
Battery connector
2)-3
Connector
move
through
the hole
Connector
locked
BNB75T/BNB300T Instruction Manual
4)
4)
2)