Advertisement
Part One: Outlooks, Check List & Features
Outlooks
Extension module for FNSW-1600/FNSW-2400
100Base - FX
HDX
FDX
100Base - FX
HDX
FDX
FNSW-B01ST/FNSW-B01SC:
1-port 100Base-FX switch extension module
Check List
♦
The Module
♦
This Installation Guide
Part Two: Installation
Installation Steps
1. Cabling Guidelines
♦ Maximum length of a multi-mode fiber cable (62.5/
125µm) is:
2 kilometers (6560 feet) for full-duplex, or
412 meters (1351 feet) for half-duplex 100Base-FX
after module installed
2. Power off the FNSW-1600/FNSW-2400 and remove the
unit from the 19-inch rack.
3. Release the two screws to remove the module cover.
4. Slide in the module follows the chutes firmly. Secure the two
screws.
ST /SC Interface
2
Advertisement
