EXCELL PRECISION CO., LTD.
CHAPTER 5 CAPACITY CALIBRATION
5-1 PARAMETER SETTING
Switch the capacity calibration switch to "ON" and the display shows
Press the
key and the display shows
F n
Refer to 3-1 Front Panel for the key functions to set the relative parameters.
5-1-1 Flow Diagram
1.
Decimal Point
2.
Max. Capacity
3.
Min. Division
4.
4.
Zero Tracking
5.
Unstable
5.
Detection
.
Using
and
choose the desired
settings
⇒ Shift the flashing digit
one space to left
⇒ Shift the flashing digit
one space to right
⇒ Save the settings
⇒ Exit the settings
EX-2001 Plus v1.3
.
.
.
. .
.
keys to
Switch the
calibration switch
to OFF
.
then enter the setting mode.
.
Setup completed
.
Setup completed
Setup completed
Setup completed
Setup completed
11
.
SME300000060