Table of Contents
Advertisement
Check points
Check that the folding
mechanism works properly
and is free from defects
Check that hand grips
and handle tube are fixed
properly and are free from
defects.
Check that the frame is free
from defects.
Check that seat and backrest
are fixed properly and are
free from defects.
Check that the arm supports
are free from defects.
2.4 Cleaning
The product can be cleaned and disinfected using commercially
available detergents.
IMPORTANT
– Cleaning must be done at least once a year.
– Do not use an abrasive detergent cleaner.
– Do not use a steam cleaner.
– Never use acids, alkalies or solvents.
1542536-B
Possible issue
When folding the device,
it does not stay in a folded
position.
The bolt in the folding joint
is loose.
The safety latch is damaged
or deformed.
The hand grip/grips are
damaged.
The hand grip/grips can
easily be rotated.
The adjustment knob or the
locking device (Alpha) does
not lock properly.
The handle tubes are bent
or damaged.
The frame is damaged or
defect.
The coating is damaged or
scratched.
The backrest or the backrest
attachments are damaged.
The screws on the backrest
or the backrest attachments
are loose.
The seat is damaged.
The support bar located
under the seat is not
properly fixed.
The arm supports or the
arm support cushions are
damaged.
Action
•
Replace the folding mechanism
parts including the spring.
•
Replace the seat if the strap for the
folding lock is damaged.
•
Re-assemble the bolt.
•
Use permanent locking glue.
•
Replace the safety latch.
•
Replace the hand grip/grips.
•
Replace the hand grip/grips.
•
Clean the tubes with an oil-free
grease solvent such as window
cleaning fluid.
Futura / Symphony:
•
Replace the knobs and the locking
sleeves.
Melody / Soprano:
•
Replace the knobs and the nut
washers.
Jazz:
•
Replace the handle bar and the
knob.
Alpha:
•
Replace the locking device and the
height adjustment tube.
•
Replace the handle bars.
•
Scrap the device.
•
Use touch-up colors to repair
damages.
•
Replace the backrest.
•
Tighten the screws.
•
Replace the seat.
•
Tighten the screws or replace the
seat.
•
Replace the arm supports or the
arm support cushions.
•
The product can be washed in a washing machine or by hand.
•
The washing and drying temperature may not be higher than
60º C.
•
High-pressure cleaner or ordinary jet of water may be used.
However, do not aim the jet towards bearings, draining holes or
labels.
•
Clean with damp cloth and mild detergents.
•
Clean the wheels with a brush (no wire brush!).
•
After washing, wipe the product dry.
Maintenance
Comments
Not valid for Jazz
Only valid for Jazz
Not valid for Jazz.
Not valid for Jazz.
Touch-up colors are available
as spare parts.
Only valid for Soprano.
Only valid for Alpha.
OK
7
Advertisement
Table of Contents
