TANEL Electronics WIP-22D User Manual page 2

Power
Battery life
Low power indication
Size
device
case
3. Description of the controls
There are two control knobs on the front panel:
upper – to select the operating function,
OFF – power off
DENSITY – setting the density with the lower
knob
THICKNESS – setting the thickness with the
lower knob
SETTINGS CHECK – alternately displaying the
previously set density and thickness
MEASURE – automatic calibration (approx. 4
sec.) and measurement
lower – to set the density and thickness of the wood. This
knob is active when the upper knob is set to
DENSITY or THICKNESS.
- 2 -
battery 6F22, 9V
approx. 5000 meas.
yes
165 * 80 * 33 mm
270 * 180 * 55 mm
GUARANTEE
The manufacturer guarantees the correct functioning of
the Wood Moisture Meter WIP-22D under normal use for a
period of 12 months:
Serial number ..............................................
Production date ..........................................