Easy@Home DV-888DC User Manual page 6

Attached the 2-in-1 crevice/brush tool to the main body

Insert the 2-in-1 crevice/brush tool (#3) into the connecting joint (#4). It does
not click into place. Insert the connecting joint into the main body (#1) until
you hear an audible clicking noise.

To disassemble the 2-in-1 crevice/brush tool from the pole, pull the 2-in-1 tool
straight out from the connecting joint. It is not clicked into place. Press the
red pole attachment release button (#7) then remove the connecting joint.
6
Assembly