Page 1
Basic 7in and 9in Bluetooth Keyboard Revision History Revision Date Notes Released By 05/04/2014 Initial Release Owen Carlson 05/24/2015 Updated Release Owen Carlson...
Table of Contents 1. General Specification ..........................6 2. Mechanical Specification ......................... 8 2.1. Characteristics of Material ........................8 2.2. Packed – Including Packaging....................... 8 2.3. Detachability of Cable Pull Out ......................9 2.4. Key module configuration ........................9 2.5. Key Board Specification ........................10 2.6.
Page 4
3.10.1. 7in Non backlight Alcatel Android 5.0 US ........Error! Bookmark not defined. 3.10.2. 7in Non backlite LG E8 Android 5.0 US ........Error! Bookmark not defined. 3.11.Bluetooth 3.0 9 inch Keyboard Key Matrix for Apple ................ 20 3.12.Schematic Circuit ..........................21 3.13.Pseudo N-Key Rollover Capability .....................
1. General Specification This specification is applied to the Bluetooth wireless keyboard folio for Windows iPad series. General Product Information Product Type ZAGG Folio Keyboard Connection Type Bluetooth Wireless Keypad Features Slim Wireless Protocol Bluetooth 3.0 Wireless Range Software Support (at...
2. Mechanical Specification 2.1. Characteristics of Material Parts Material Color Texture White/Black/ PC/ABS Bezel, Key Surround Purple and as MT11010 (70/30) needed Keys, HF-3201GS White/Black Texture MT 11005 Semi-Gloss Paint Synthetic Fabric Cover, Interior Black Suede Weave/ Black/ Fabric Cover, Exterior Knit Purple/ Red White/Black/...
2.3. Detachability of Cable Pull Out The cable entrance for corded devices can meet product specification. Function test will be performed before and after this test. Refer to the definition of related standard. USB Implementers Forum. 2007-01-04. Micro USB connector mating force is less than 30N, un-mating force is 8+/-1N.
2.5. Key Board Specification 2.6. Life Test Standard key is 5 million cycles and Function key is 3 million cycles. ( 4 times/second, 100 ± 20 gf ). 2.7. Specification of Rubber Switch Normal And Function Key Rubber Dome Key Characteristic Point Stroke Force...
Keycap Pull Off Force 500gf minimums with equal load applied to all 4 corners of the keycap 150gf minimums at any one corner or side of a given keycap 2.8. Max Keycap Depressing Force To act on the center of the keycap with stand 5Kgf force for 1 minute. 2.9.
Space key ±0.4mm Long Key ±0.4mm 2.12. Key in Test Spec On The 4 Corners Of The Key Cap Unit: mm (All Types) A. Standard Key B. Space Bar C. Long Types Key D. Small Key Key in Force (Center) ≥ 80g 2.13.
2.13.2. Tact Switch No tact switch 2.14. Sleep Magnet Function Act magnet switch in 1.1mm height from top surface of KB cover. 2.15. Snap force and life test Snap in force between tablet and keyboard cover is (TBD)15N +/- 20% in handle and snap out force is (TBD)25N +/- 20%.
Standby Mode current 0.25mA Avg Hibernation mode current 0.033mA Avg Bluetooth disconnect Bluetooth keyboard will disconnect communication after 20 minutes. The keyboard will always stay paired so when coming out of hibernation it will automatically allow keyboard to work with tablet with limited time delay.
Name Remark Display in Bluetooth ZAGG Basic Folio Zagg Basic will show in the display of Bluetooth settings devices the tablet detects Note: Now the turning ON and OFF of the keyboard through the key frame is really only toggling between Hibernation Mode and Active Mode and disconnecting Bluetooth connection when in Hibernation Mode.
RF IC Model for keyboard: Broadcom BT3GMD-B47P is a Bluetooth Human Interface Device (HID) module based on the Broadcom BCM20730 Bluetooth 3.0 specification basic rate-compliant stand baseband processor with an integrated 2.4GHz transceiver or equivalent performance chip. 3.6. Bluetooth Module Block Diagram...
3.7. Sleep mode Auto sleep if no typing for 20 minutes. 3.8. Keyboard layout 3.8.1. 7 Inch Key frame 3.8.1.1. 7in Non backlit Key Frame US Apple Layout 3.8.2. 9 Inch Key frame 3.8.2.1. 9in Non backlit Key Frame US Apple Layout...
3.12. Pseudo N-Key Rollover Capability ‘N’ key roller is the numbers of keys that may be held depressed simultaneously and have the keyboard generate the appropriate code for each pressed and released key without keyboard interruption. The keyboard is capable of at least a pseudo 6-key rollover. All combinations of Ctrl, Alt and Shift keys are not ghost keys.
4. Environmental and Reliability Specifications 4.1. Acoustic Noise Test Item Specification Test Equipment Keyboard : Normal key Max: 50dBA, Acoustic noise Space bar: Max:55dBA Mouse: Max:55dBA A = 38 +/- 13mm B = 750 +/-13mm C = 260 +/-13mm D = 330 +/-13mm Sound level meter: Point microphone toward the center-line of the spacebar on keyboard.
Test Item Specification Test Equipment High Temp 1. Sample size: 5 pieces Chamber High Humidity 2. Test Condition: 50°C /95%, 120 hours Test 3. Judgment Standard: No malfunction No decay inside of the product Storing in Low 1. Sample size: 5 pieces Chamber Temperature 2.
4.5. Bare Unit Drop Test Test Item Specification Test Equipment Bare unit drop test 1. Sample size: 2 pieces Drop machine 2. Test Condition : Drop at 91.44 cm ( 36in ) on wood surface, 5 times on each face and 5 times on the top and bottom ( Total 30 times without device) NAC and Mahindra Testing 3.
4.7. Life Test Test Item Specification Test Equipment Keycap Spec: Keyboard normal keys: 5 M cycles Life tester machine Function key: 3 M cycles On/Off Button N/A On Key Frame Pairing Button N/A On Key Frame Snap Life Test Magnetic force between tablet and keyboard is snap Test by Hand or Machine in force 6N +/- 20% and snap out force is 6.5N +/- 20%.
Spillage test Unit shall be ON. The keyboard shall be functional after performing the liquid spill tests: Pour the liquid from a funneled system from a height of 3.0" above the keyboard over between the G, B, and H keys. The funnel should accurately dispense all the liquid at a rate of approximately 4 Oz (116 cc) per minute of elapsed time.
Endurance test Hinge endurance: There shall be no damage, Pull gauge. when a load of 25N is applied in pressure direction for 15 seconds. Rubber pad endurance: Rubber pad does not peel off when a load of 10N is applied on its surface. ...
4.18. Keycap Texture Endurance Test Test Item Specification Test Equipment Keycap texture 250,000 cycles, 200gm, CS-5 wear eraser, no visual Abrasion test machine endurance test change to surface finish 4.19. Compression Test-Type 1A Test Item Specification Test Equipment Compression Test 1Min load Compression test Test-Type 1A L = M x Jx(H-h)/ h x F...
MSDS U.S.A Battery WEEE U.S.A ALL Electrical (Mainly Euro) NAC or Mahindra U.S.A Complete Folio (ZAGG Performs) 4.23. Environment Specification Items Items Specifications Compliance to To be reflected in Product safety (environment) evaluation list To clarify the law regulation/ regulations to correspond to “Law/regulation control standard (product)”...
4.24. Appearance Specification Appearance specification: Refer to SIP standard. Corrosively: It is not seen the rust part to the appearance part. (Edge of sheet metal is included.) 5. Patent Items Requirement General There is no infringing of other company patent in worldwide. 6.
7. Keyboard Layout for different Languages 8. Cable 8.1. Micro USB Charge Cable...
Page 36
FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.