Self Clean Operation - Sharp AH-S22DP2 Service Manual

PLASMA CLUSTER OPERATION
You can choose PLASMA CLUSTER AUTO OPERATION, AIR CLEAN OPERATION or
REFRESHING OPERATION
1h
NOTES:
• Setting of the PLASMACLUSTER operation will be memorized and will operate in the
same mode, the next time you turn on the air conditioner.
• To turn off the PLASMACLUSTER lamp, press the DISPLAY button.

SELF CLEAN OPERATION

NOTE
:
• You cannot set the temperature, fan speed, air flow direction or timer setting during the
SELF CLEAN operation.
1
During operation, press the PLASMACLUSTER
button to select the mode.
PLASMACLUSTER AUTO
• In the AIR CLEAN operation, the blue
PLASMACLUSTER lamp on the unit will light up.
• In the REFRESHING operation, the green
PLASMACLUSTER lamp on the unit will light up.
TO CANCEL
Press the PLASMACLUSTER button until
1 PLASMACLUSTER symbol on the remote control
display goes off.
• The PLASMACLUSTER lamp on the unit will turn
off.
1
Press the SELF CLEAN button when the unit is not
operating.
• The remote control displays "
• The red OPERATION lamp (
PLASMACLUSTER lamp on the unit will light up.
• The unit will stop operation after forty minutes.
• The remaining operation time will be indicated on
the TEMPERATURE INDICATOR of the indoor
unit in minute decrements.
TO CANCEL
1
Press the SELF CLEAN button.
Or, turn the unit off by pressing the ON/OFF button.
• The red OPERATION lamp (
PLASMACLUSTER lamp and the TEMPERATURE
INDICATOR on the unit will turn off.
19
AIR CLEAN REFRESHING CANCEL
".
) and the blue
),the blue
AH-S22DP2
AH-S25DP2
AH-S32DP2