Pcs20 Operation; Viewing The Status Menu; Controlling Outlets - Raritan PCR8 User Manual

C 2: Q S
HAPTER UICK TART

PCS20 Operation

Viewing the Status Menu

The PCS20 unit is powered ON once it is plugged in. The Status menu appears on the monitor of the connected computer:
Note: If the Status menu does not appear, ensure that the correct cables and adapters are being used and that
they are connected properly, and verify the serial communication parameters are correctly configured.

Controlling Outlets

To set or change the status of the outlets, enter one of the following commands, where "n" is the outlet number to command:
ON n
OFF n
REBOOT n
Entering an outlet number of "0" sends the command to all outlets.
Important! Reboot works only on those outlets that are "On."
Raritan PCS20
(C) 2003 Raritan Computer, Inc.
F1.01
Option(s) Installed:
True RMS Current
Internal Temperature
True RMS Voltage
Enter user name: Raritan
Unit ID: RPS20
Average Power: 0 Watts
True RMS Voltage: 110.6 Volts
True RMS Current: 1.5 Amps
Internal Temperature: 26.5 C
Outlet Circuit Breaker: Good
1)...Outlet 1 : Off
3)...Outlet 3 : Off
5)...Outlet 5 : Off
7)...Outlet 7 : Off
9)...Outlet 9 : Off
11)...Outlet 11 : Off
13)...Outlet 13 : Off
15)...Outlet 15 : Off
17)...Outlet 17 : Off
19)...Outlet 19 : Off
Type "Help" for a list of commands
PCS20>
PCS20 Status Menu
Apparent Power: 177 VA
Maximum Detected: 8.4 Amps
2)...Outlet 2 : Off
4)...Outlet 4 : Off
6)...Outlet 6 : Off
8)...Outlet 8 : Off
10)...Outlet 10 : Off
12)...Outlet 12 : Off
14)...Outlet 14 : Off
16)...Outlet 16 : Off
18)...Outlet 18 : Off
20)...Outlet 20 : Off
11